See the relief up close
Patricia's photographs show the finished depth, shaded faces, fine knotwork, raised borders, and lettering across each piece.
Patricia / xTool F2 UltraMaker project notes
Patricia
Patricia's F2 Ultra projects
Patricia is documenting deep-relief engraving on brass and slate with the xTool F2 Ultra.
Patricia's brass relief projectPatricia's solid brass Bible and cross relief, engraved on an xTool F2 Ultra.
Featured maker projects
Patricia's xTool F2 Ultra projects.
Open a photo for the full view and process notes.
Project 01Original project photograph supplied by Patricia
Bible and cross relief on brass
Made with xTool F2 UltraPhoto: Patricia
Project 02Original project photograph supplied by Patricia
Portrait relief on a slate coaster
Made with xTool F2 UltraPhoto: Patricia
Project 04Original project photograph supplied by Patricia
Viking face side of a two-sided coin
Made with xTool F2 UltraPhoto: Patricia
Patricia uses an xTool F2 Ultra to create detailed relief engravings on brass and slate. Her first published set includes three coin projects and one slate portrait, documented in five original photographs.
Read Patricia's storyPublished maker profile
MakesDeep-relief engraving
Featured toolxTool F2 Ultra
Patricia's F2 Ultra relief work
Four xTool F2 Ultra relief projects on brass and slate.
Patricia's five original photographs show the finished relief on three coin projects and one slate portrait. The documented details stay with the projects she clearly identified, including 256 layers on the slate portrait and separate run times for each side of the newest coin.
Four F2 Ultra relief projects publishedApproved by Patricia and published with standing edit rights
Machine and materials Patricia listed
- xTool F2 Ultra
- Solid brass coin blank
- Slate coaster
Patricia supplied and approved the portrait and five original project photographs for public site use. This page publishes only the details she clearly tied to each pictured project. Patricia keeps standing rights to request corrections, replacements, or removal.
Five original project photographs
Patricia's first four F2 Ultra relief projects.
Click any project photo for a full-size view and the details Patricia supplied for that piece. The newest coin includes both sides and the time each side took.
About Patricia
Patricia uses the F2 Ultra for detailed relief work on brass and slate.
Patricia's first collection brings together four xTool F2 Ultra relief projects: a solid brass Bible and cross coin, a portrait engraved into slate, a Viking relief coin, and a two-sided Viking face and longship coin.
Her five close-up photographs keep the finished work at the center of the page. They show how relief, fine borders, lettering, and shaded details read differently across the brass and slate surfaces.
Patricia reported that the slate portrait used 256 layers. For the two-sided coin, the Viking face took about 30 minutes and the longship took about 15 minutes. These are creator-reported results for the pictured pieces, not universal presets.
- Deep-relief engraving
- Brass coin engraving
- Slate engraving
- xTool F2 Ultra
- Layered relief engraving
Maker profiles
Meet more makers putting new tools to work.
Browse project photos, process notes, and workshop results shared by makers across the community.
Return to the makers hubMore from Patricia
Want to see what Patricia makes next?
These links go directly to pages the maker chose to share.
Creator links from this profile
See more of Patricia's work here.
Patricia's links
Visit Patricia's page.This link goes straight to a page Patricia chose to share. A visit, follow, or share is a simple way to support an independent maker.