Laser News Digest - May 6, 2026
Published
xTool M2 Day 3: Creator Calling day 11, color samples circulating, mechanism chemistry still undisclosed — public sale May 26. eufyMake E1 Day 2: fourth review (Creative Bloq) confirms UV flatbed delivery; perk package open through May 31. Creality Falcon T1: 112+ days no price, appeared at RAPID+TCT as ecosystem component — still no early bird close date.
xTool M2 Day 3: Creator Calling Day 11 — Color Samples Accumulating, Mechanism Chemistry Still Undisclosed, 20 Days to Public Sale
The xTool M2 Color Craft Laser launch event enters its third day (May 6, 2026). The public sale date remains May 26 — 20 days from today. Creator Calling status: Day 11 from the approximate April 25 unit shipment date. At Day 11, creators have had machines for 11 days. Content as of May 6: color output samples on wood, acrylic, and leather are circulating on YouTube, Instagram, and TikTok. The Creator Calling content pattern through Day 11 remains consistent with Days 9–10: dual-system architecture confirmed (M2 uses a primary laser system plus a secondary color system), footprint larger than M1 Ultra, an integrated right-side station identified as having curing or drying function, multi-surface color output samples. What continues to be absent from all 100 creator units through Day 11: (1) color mechanism name or chemistry — xTool has not published technical documentation for the secondary color system beyond the 'Color Craft Laser' branding; (2) power specification for either the primary or secondary system; (3) bed dimensions; (4) consumable identification or cost for the color system. The competitive context: eufyMake E1 (A4 UV flatbed, $2,299, on sale since May 6, four positive retail reviews) is now a fully documented market reference point. The M2's color output samples visible in creator content are comparable to UV flatbed output in appearance, but no independent photometric analysis has been performed. Buyers evaluating M2 vs. E1 have 20 days of Creator Calling content accumulation before the May 26 public sale. The launch event remains open to join at xtool.com — joining locks the launch price at no cost with no purchase commitment until May 28.
Day 11 of Creator Calling is past the typical point at which major technical details 'leak' through creator content. The fact that no creator has disclosed the color mechanism chemistry or consumable identity by Day 11 suggests one of three scenarios: (1) creators are under NDA specifically covering the mechanism — xTool's Creator Calling T&Cs may prohibit mechanism disclosure before May 26; (2) the mechanism is genuinely not distinguishable from output appearance alone — creators don't know if it's inkjet, UV, or a hybrid because the output looks similar across approaches; (3) xTool has not provided technical documentation to creators, only finished samples — creators are generating output without knowing the underlying chemistry. From a buyer's perspective, all three scenarios lead to the same conclusion: the M2 mechanism chemistry remains unknown until xTool publishes official specs on or before May 26. The buyer decision framework for Day 3: if you have not joined the M2 launch event, joining today costs nothing and preserves the launch price option through May 26. The eufyMake E1 perk window (free inks + $100 coupon) runs through May 31 — five days after the M2 public sale date and three days after shipping begins. For buyers who registered for E1 perks: you have a risk-free window to evaluate M2 specs before making the E1 purchase decision. No deadline conflict exists between the M2 event and the E1 perk window.
💡What this means for you
M2 event at Day 3: Event active (join at xtool.com). Public sale: May 26. Shipping: May 28+. Specs still publicly undisclosed: price, mechanism, power, bed dimensions. Creator Calling: Day 11, 100 units in creators' hands since ~April 25. Content confirmed through Day 11: dual-system architecture, footprint larger than M1 Ultra, integrated right-side station (curing/drying function), color output on acrylic/wood/leather. Still absent through Day 11: mechanism chemistry, consumable identity/cost, power specs, bed dimensions. eufyMake E1 as reference: $2,299 Basic, A4 UV flatbed, CMYKW + Glossy + Texture, 1440 DPI, four retail reviews confirming delivery, ships within days.
Market Position: The M2 vs. E1 competitive window: E1 is available today with four positive retail reviews and a 12-month backer usage report; M2 event is open but specs unrevealed, public sale May 26. Buyers who need confirmed desktop color-on-hard-surfaces capability in May: E1 is the only path today. Buyers who can wait 20 days: M2 launch event (join free, no commitment) plus 20 more days of Creator Calling content accumulation before the May 26 public sale decision.
- Does any Creator Calling participant disclose the M2 mechanism chemistry or consumable identity before Day 14, or does NDA coverage extend through the May 26 public sale date?
- Does xTool release a partial spec sheet (price, bed dimensions) before May 26 in response to the eufyMake E1 now being a fully documented market reference at $2,299?
- At Day 11 with 100 creator units in the field: does any creator post a direct side-by-side comparison of M2 color output versus E1 UV flatbed output on the same materials?
⏸️ Wait if: You want to compare M2 specs before purchasing either machine — join the M2 event today (no cost, no commitment) and maintain E1 perk eligibility through May 31; the M2 May 26 spec reveal gives you both data sets five days before the E1 perk window closes on May 31
✅ Buy if: You have decided on the E1 and want same-week shipping — purchase now with the perk package (free inks + $100 coupon) if you registered by May 5; the E1 is fully documented, confirmed, and shipping within days at $2,299
eufyMake E1 Day 2 On Sale: Creative Bloq Fourth Review Published — 'I Can Print on Anything' — Sales and Review Momentum Solidifies
The eufyMake E1 UV Printer enters its second day of public availability with a fourth major retail review published: Creative Bloq's 'I Tried the World's First Home UV Texture Printer and Now I Can Print on Anything.' Creative Bloq's verdict joins Tom's Hardware, Hackster.io, and SlashGear — all four confirming the E1 delivers desktop UV flatbed printing on 300+ material types at $2,299. Creative Bloq's review is notable for its emphasis on the 3D texture output — the CMYKW + Texture ink channel combination that produces raised texture on flat surfaces — as the most visually distinctive differentiator from standard inkjet printing on objects. The accio.com marketplace has named the E1 a 'Best Seller 2026' based on unit volume data from the Kickstarter-to-retail transition period. eufyMake confirmed shipping within days from post-Kickstarter production inventory. Perk package availability: buyers who registered during the April 8 – May 5 window and purchase before May 31 receive White Ink (100ml) + Glossy Ink (100ml) free, $100-off coupon on orders over $2,600, Shipping Protection, and $100 off eufyMake Care — approximately $350–$400 total value at no cost. Standard post-May-31 pricing: $2,499 for non-perk buyers. Deluxe bundle ($3,299) remains available with the UV-DTF Roll-to-Film module. The Tom's Hardware retail review (published Day 1) specifically evaluated the E1's 3D texture function versus standard inkjet-on-object approaches and confirms the CMYKW + Texture channel produces tactilely perceptible raised texture on hard surfaces — a capability not available on standard direct-to-object inkjet printers below $10,000.
Four positive retail reviews from four distinct publications in the first two days of public sale is an unusually strong launch signal. The consistency across Tom's Hardware (hardware review publication), Hackster.io (engineering/maker publication), SlashGear (consumer technology publication), and Creative Bloq (design/creative professional publication) is significant because each represents a different reader segment evaluating the E1 from a different use-case perspective. Tom's Hardware evaluated it as a hardware device (precision, reliability, maintenance). Hackster.io evaluated it as a maker tool (workflow, substrate flexibility, project integration). SlashGear evaluated it as a consumer technology purchase (value, usability, creative potential). Creative Bloq evaluated it as a creative professional's tool (artistic output quality, 3D texture utility, design workflow). All four found the E1 credible for their respective audiences. For buyers who have been waiting for post-launch retail reviews before purchasing: four reviews from four different editorial perspectives, all positive, is the most comprehensive Day 2 review picture in the desktop UV printer category. The 12-month KandGMakeIt backer review (published pre-launch) adds longitudinal data that none of the retail review outlets can match. No material-level durability issues have emerged across 12 months of backer use.
💡What this means for you
eufyMake E1 Day 2 review status: Tom's Hardware (positive), Hackster.io (positive), SlashGear (positive, 'immense potential'), Creative Bloq (positive, 'print on anything'). All four confirm: 300+ material compatibility, 3D texture output via CMYKW + Texture channel, 1440 DPI, offline mode, AP mode. Consistent caveat across all four: white ink maintenance discipline required for infrequent users. 12-month backer data (KandGMakeIt): durability confirmed, output consistent with maintenance followed. Sales indicator: accio.com 'Best Seller 2026' designation based on unit volume. Perk package (registered April 8–May 5, purchase by May 31): ~$350–$400 value. Standard post-May-31: $2,499.
Market Position: At Day 2 of public sale, eufyMake E1 has four independent retail reviews and a 12-month usage report — more validated market data than any other desktop UV flatbed printer at its price point. xTool M2 (event active, no retail reviews, specs unrevealed, public sale May 26) and xTool UVP (announced, no confirmed ship date) are the only other desktop color-on-hard-surfaces machines announced. The E1's Day 2 review portfolio positions it as the default reference machine for the category until M2 specs are revealed on May 26.
- Does any of the four retail reviewers compare E1 output to the xTool M1 Ultra UV module (the closest available M2 proxy) — and if so, what does the comparison suggest about M2 output expectations?
- Does eufyMake publish a Day 2 sales total or unit count from the first 48 hours of public availability?
- Does the Creative Bloq review's 3D texture emphasis drive a measurable shift in the buyer audience toward design/creative professionals versus the maker audience that dominated the Kickstarter backer base?
⏸️ Wait if: You registered for E1 perks and want M2 comparison data — perk window stays open through May 31, which is five days after the M2 specs drop on May 26 and three days after M2 shipping begins May 28; the E1 decision does not need to be made today
✅ Buy if: You need a confirmed desktop UV flatbed with four positive retail reviews and same-week shipping — the E1 is the most reviewed and documented desktop UV flatbed available as of today; $2,299 with the perk package (if registered) includes ~$350 in free ink and coupon value
Creality Falcon T1: 112+ Days Post-CES With No Price — RAPID+TCT Boston Appearance Shows Professional Ecosystem Ambition Without Pricing Clarity
The Creality Falcon T1 5-in-1 modular galvo laser engraver has now exceeded 112 days since its CES 2026 reveal (January 12, 2026) without a published retail price, official ship date, or conversion of its early bird pre-order page to a purchase phase. New development as of May 6: Creality's RAPID+TCT 2026 appearance in Boston (April 22, 2026) positioned the Falcon T1 as a component of what Creality calls the 'Desktop Micro-Factory' ecosystem — displayed alongside the SPARKX i7 multi-material 3D printer, HALOT X1 resin printer, Sermoon P1 3D scanner, and the Filastudio M1+R1 filament recycling system. At RAPID+TCT, a professional additive manufacturing conference, Creality's ecosystem positioning targets studios, schools, and small businesses — not just hobbyist makers. The T1's role in the ecosystem: laser processing for wood, acrylic, metal, and glass using five interchangeable modules (20W Diode, 40W Diode, 60W MOPA, 20W Fiber, 5W UV) within a Class 1 enclosed footprint. Despite the RAPID+TCT showcase, Creality did not announce T1 pricing or shipping timeline at the event. The early bird pre-order page at crealityfalcon.com remains active. Community interest: while the early bird page stays open, the modular 5-in-1 concept has generated sustained community interest in laser forums — the T1 remains the most-discussed upcoming desktop laser without a confirmed purchase path.
The RAPID+TCT appearance adds an interesting context layer to the T1's extended early bird silence. RAPID+TCT is a professional additive manufacturing conference — Creality's decision to showcase the T1 in that context alongside a 3D scanner (Sermoon P1), professional resin printer (HALOT X1), and filament recycling system (M1+R1) suggests Creality is positioning the T1 for a professional rather than purely hobbyist market. Professional equipment pricing typically sits higher than hobbyist pricing — and professional customers are less price-sensitive if the professional use case is compelling. This could explain why the T1's early bird pricing (expected in the $3,500–$5,000 range based on community estimates) has not been publicly confirmed: Creality may be testing professional market appetite before committing to pricing that could be seen as expensive in the hobbyist laser market but competitive in the professional fabrication market. The T1's 5-in-1 concept is genuinely compelling for schools and studios that want one enclosed machine capable of diode, MOPA, fiber, and UV work — a use case that currently requires 4+ separate machines. For early bird registrants: register interest at crealityfalcon.com remains non-binding. No money is at risk in maintaining early bird registration. For buyers who need a multi-capability laser now: the xTool F2 Ultra (fiber + UV, confirmed shipping) and the xTool M1 Ultra (multi-mode laser system, confirmed available) are the actionable alternatives while the T1 remains in early bird limbo.
💡What this means for you
Creality Falcon T1 status at day 112 post-CES: Early bird page active at crealityfalcon.com. RAPID+TCT appearance (April 22, Boston): showcased as Desktop Micro-Factory component. Ecosystem context: SPARKX i7 (AI multi-color 3D printer), HALOT X1 (professional resin, automated resin management), Sermoon P1 (3D scanner, wireless, no scanning spray for black/metallic), M1+R1 Filastudio (filament recycling). T1 specs (announced, pre-production): 5 modules — 20W Diode, 40W Diode, 60W MOPA, 20W Fiber, 5W UV. Speed: 10,000 mm/s galvo. Precision: 0.001 mm. Enclosure: FDA Class 1. Days since CES reveal: 112. Official price: unpublished.
Market Position: The RAPID+TCT professional context positions the T1 as a higher-value tool than its early bird page implies. In professional fabrication settings, the T1's 5-in-1 capability at one Class 1 safe machine is genuinely unique — no competitor offers a single Class 1 enclosure with fiber, MOPA, UV, and diode in a desktop footprint. The T1's pricing silence may reflect Creality calibrating between hobbyist-accessible pricing and professional-tier pricing for a genuinely professional capability set.
- Did Creality provide any timeline signal at RAPID+TCT for T1 availability — and will any professional fabrication press coverage from the event include more specific T1 pricing intelligence?
- Is the T1's FDA Class 1 certification complete as of the RAPID+TCT showing, or is the certification still in progress — and does RAPID+TCT participation indicate the certification is further along than external observers assumed?
- Does Creality's Desktop Micro-Factory professional positioning change the T1 pricing target — and if so, does the early bird pre-order pricing honor its current estimates or reset to a professional-tier price point?
⏸️ Wait if: You need a multi-capability desktop laser in the next 60 days — the T1 has no confirmed price or ship date and 112 days of early bird silence makes planning around it impractical; xTool F2 Ultra (fiber + UV, ships now) is the confirmed multi-capability alternative
✅ Buy if: Maintain non-binding early bird registration at crealityfalcon.com — the RAPID+TCT professional-ecosystem positioning makes the T1's eventual pricing decision particularly interesting; registration preserves early-bird priority at no cost while the professional vs. hobbyist pricing question resolves
Frequently Asked Questions
What is the current status of the xTool M2 launch event on Day 3?▼
The M2 launch event is active — join at xtool.com to lock the launch price with no purchase commitment. Creator Calling is Day 11: 100 creators have had units for 11 days. Color output samples on wood, acrylic, and leather are circulating but the mechanism chemistry, power specs, and bed dimensions remain publicly undisclosed. Public sale is May 26, shipping May 28. The eufyMake E1 is available today at $2,299 as the confirmed comparison point.
Are there now four eufyMake E1 reviews and what do they say?▼
Yes — Creative Bloq's Day 2 review 'I Can Print on Anything' joins Tom's Hardware, Hackster.io, and SlashGear in confirming the E1 delivers UV flatbed printing on 300+ materials. All four are positive. The consistent caveat: white ink maintenance required for infrequent users. Creative Bloq specifically highlights the 3D texture output (raised texture on hard surfaces) as the most distinctive capability. The 12-month KandGMakeIt backer review adds longitudinal durability confirmation.
Why did Creality show the Falcon T1 at RAPID+TCT without announcing pricing?▼
Creality positioned the T1 at RAPID+TCT (a professional additive manufacturing conference) as part of a 'Desktop Micro-Factory' ecosystem including the SPARKX i7 3D printer, HALOT X1 resin printer, Sermoon P1 3D scanner, and Filastudio M1+R1. No pricing was announced at the April 22 Boston event — consistent with 112+ days of early bird silence. The professional ecosystem context suggests Creality may be calibrating the T1 price for professional rather than hobbyist buyers.
Should I buy the eufyMake E1 now or wait for the xTool M2?▼
If you registered for E1 perks (April 8–May 5): you have until May 31 to purchase at $2,299 with ~$350 in free ink and coupon value. The M2 specs drop May 26, M2 shipping begins May 28 — three days before the E1 perk window closes. Join the M2 event now (free, no commitment) and evaluate both spec sets by May 28 before the E1 perk window expires. No decision deadline forces a choice today.