EufyMake E1 Shipping Update: January 2026 Backer Status
A dated record of eufyMake's production restart, early shipment count, and separate accessory and ink sequencing
Published January 31, 2026 · Updated July 25, 2026
This page preserves the January 2026 EufyMake E1 backer-shipping update. For the current retail picture, our E1 review now tracks the official U.S. offer, software changes, operating-cost inputs, and what we have not yet measured ourselves.
Current status · checked July 25, 2026
The E1 is now a retail and owner-context story.
eufyMake's U.S. page lists the Basic bundle at $2,499 and the E1 in stock with estimated shipping in 1–3 business days. The printer is in our shop, but we have not completed and published repeatable owner measurements for yield, durability, adhesion, speed, or maintenance burden.
$47M
Kickstarter Raised
17K+
Backers
60
Campaign Days
2.5D
Texture Printing
Shipping Timeline
These are dated campaign and manufacturer checkpoints, not live shipment statuses.
April 29–June 28, 2025
The 60-day Kickstarter campaign closed with $46,762,258 pledged by 17,822 backers.
Before December 26, 2025
eufyMake paused production to address engineering hurdles involving the metering tank and magenta ink pressure.
December 26, 2025
eufyMake reported that production had resumed and that 1,635 printer units had been produced and shipped.
January 31, 2026
This article recorded the backer-shipping picture at that point. Later retail status belongs in the current E1 review, not this archive.
What interrupted production?
eufyMake's December 26 AMA recap names two engineering hurdles: the metering tank and magenta ink pressure.
Metering-tank engineering
eufyMake's December 26 AMA recap identified the metering tank as one of the engineering hurdles behind the production pause.
Official update: The company reported that production had resumed.
Magenta ink pressure
The same official recap identified magenta ink pressure as the other engineering hurdle addressed during the pause.
Official update: The company reported that its quality checks were complete and production was scaling.
Historical context: This archive reports eufyMake's dated production statements. It does not independently verify the failure rate or condition of every backer unit.
What the December 26 update said
Production and printer shipments
- • 1,635 printer units reported produced and shipped
- • Production reported back in operation after the pause
- • Regional fulfillment dates were still forecasts at that point
Ink and accessories
- • 500 ink sets reported in transit
- • Add-ons and material kits were being staged through local warehouses
- • Accessory timing was coordinated separately from printer delivery
Sources: eufyMake's December 26 AMA recap and Kickstarter's campaign record.
Frequently Asked Questions
When will my EufyMake E1 ship?▼
This page preserves the January 31, 2026 shipping update and its then-current backer timeline. For current shipment or retail status, check EufyMake directly; for our current owner notes, use the EufyMake E1 review and UV proof bench linked on this page.
Why was shipping delayed?▼
In its December 26, 2025 AMA recap, eufyMake said production had paused to address engineering hurdles involving the metering tank and magenta ink pressure. The company reported that production had resumed by that update.
Are accessories shipping separately?▼
The December 26, 2025 update treated printers, ink sets, accessories, and material kits as separate fulfillment streams. It said accessory timing had been adjusted to coordinate with printer delivery, so backers could receive components in separate shipments.
What did eufyMake report on December 26, 2025?▼
eufyMake reported that 1,635 printer units had been produced and shipped, 500 ink sets were in transit, and production had resumed after the metering-tank and magenta-pressure work. Those are dated manufacturer statements, not current shipment totals.
Where can I track my shipment?▼
The December 26 update directed backers to eufyMake's regional order-tracking pages and noted that tracker data could lag while manual input was still being improved. Current backers should use eufyMake's present support and tracking instructions.
Is The Crafty Catsman testing the EufyMake E1 now?▼
The EufyMake E1 is in our shop, but we have not completed and published a repeatable owner test. Use the current E1 review for checked pricing, software changes, operating-cost context, and the exact line between official examples and owner measurements.
Have a launch, correction, or test opportunity?
Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.
Related Resources
Researching the E1 now?
Start with our current E1 review, then check eufyMake's live availability, bundles, and consumable details before making a buying decision.
Read the Current E1 Review →Affiliate disclosure: the eufyMake offer button is a sponsored link. We may earn a commission at no added cost to you.
Check Current E1 Availability →