Skip to main content

Desktop CO₂ · Buyer guide

OMTech Polar 2.
50W RF or
70W glass?

OMTech Polar 2 desktop CO2 laser engraver and cutter official product image
Polar 2 · OMTech’s product photograph. Available with a 50W RF or 70W glass tube.

Polar 2 RF uses air cooling and is worth comparing for fine engraving. Polar 2 glass offers 70W rated power at a lower package price. Both list a 710 × 360 mm work area. Polar Lite is a smaller 55W alternative. Our recommendations use published specifications; we have not tested cut quality or job times.

Researched guide; we have not tested Polar 2 or Polar Lite. Specifications checked October 19, 2026.

Compare the two configurations
Shared work area710 × 360 mm

28 × 14 in · both configurations

50W RFAir cooled

$4,999.99 · package price when checked

70W glassWater cooled

$3,699.99 · package price when checked

RF or glass

Which Polar 2 suits your work?

The tube changes the cooling, upkeep and price. It does not give you a larger bed. Here is how we would narrow the choice from OMTech’s specifications.

OMTech Polar 2 desktop CO2 laser engraver and cutter official product image
Polar 2 · OMTech product photograph

OMTech product photograph over an illustrated wood-and-acrylic landscape. The landscape is not a Polar 2 test result.

  1. Start with the size of your work.

    Both configurations list a 710 × 360 mm work area. If your pieces exceed that bed, look at a larger machine. The conflicting pass-through information is not enough to plan long-stock work.

    Shared work area
    710 × 360 mm
    Configurations
    50W RF / 70W glass
  2. We would start with RF for fine engraving.

    Air cooling removes the water-cooling upkeep. OMTech also estimates a longer tube life than glass. Those are reasons to shortlist the RF model for small text and detailed engraving; we have not tested its finish or complete-job times.

    50W RF cooling
    Air
    What to compare
    Your engraving samples
  3. Glass offers more rated power at a lower price.

    The 70W model is worth comparing for cutting work, with a 4.3 L water-cooling tank to maintain and glass-tube replacement to budget for. Ask to see your material cut on both models before treating the wattage difference as a quality or speed result.

    70W glass cooling
    Water
    Internal tank
    4.3 L

What comes with it

Software and a rotary are included. Filtration is extra.

Both Polar 2 packages

Ready to start designing

LightBurnLicense listed with RF and glass

Both packages listed a basic rotary and wood, acrylic and PU leather starter packs on October 19, 2026. Confirm those items on your order.

Plan for your room

Budget for ventilation

Filter extraExhaust equipment is not a filtration system

Allow for suitable ventilation or filtration, plus replacement consumables. The machine price is only part of the setup cost.

Published specifications

Engraving speed: compare the same design.

50W RF

50W RF model

2,000 mm/sOMTech’s maximum speed claim

Air cooled, with no water tank to maintain. We would compare a finished engraving before paying more for speed alone.

70W glass

70W glass model

1,200 mm/sOMTech’s maximum speed claim

Water cooled, with a 4.3 L internal tank. Higher wattage does not establish the finish or time for your particular cut.

Maximum travel or engraving speeds do not tell you how long the same design takes on each machine. We have not measured either.

Full Polar 2 specifications, tube-life estimates and package contents
Machine type
Desktop CO2 laser engraver and cutter
Configurations
50W RF tube and 70W glass tube options
Work area
28 x 14 in, per OMTech Polar 2 product page
Max engraving speed claim
Up to 2,000 mm/s for the 50W RF model
Cooling
50W RF: air cooled. 70W glass: internal water cooling with a 4.3 L tank.
Material height
115 mm RF / 125 mm glass in the table and manual; the FAQ generalizes 125 mm to both.
RF tube-life estimate
30,000 / 25,000 / 20,000 hours at <40% / 40–70% / >70% power in the manual.
Glass tube-life estimate
10,000 / 6,500 / 1,500 hours at the same power bands. These are manufacturer estimates, not warranty terms or tested life.
50W RF Package
$4,999.99 for the 50W RF Package, checked October 19, 2026
70W CO₂ Package
$3,699.99 for the 70W CO₂ Package, checked October 19, 2026
Current package extras
Both list a LightBurn license, wood/acrylic/PU leather starter packs and a basic rotary (October 19, 2026); filtration is separate.
Testing status
Researched guide; we have not tested Polar 2

A smaller alternative

Polar Lite trades bed size for a lower entry price.

55W Polar Lite

Check your largest piece first

510 × 300 mmWork area · Polar 2 lists 710 × 360 mm

Lite lists a 400 × 7 mm front/rear opening and 500 mm/s peak processing speed. Follow its operating instructions before planning pass-through work.

It is a separate machine: Polar 2 RF cooling and tube-life figures do not apply.

Four US packages

Pick software and rotary separately

$2,199.99Standard package · checked October 20, 2026

The Standard Package lists neither a LightBurn license nor a rotary. Other packages add one or both. None lists a filter.

Paid link: we may earn a commission at no extra cost to you.

Compare Polar Lite packages on OMTech (paid link)

Shipping needs confirmation: the page showed both an early-November shipping estimate and one-business-day shipping text. We have not verified delivery or warehouse stock.

Compare all four Polar Lite packages and dated prices
55W Standard Package
$2,199.99
Machine; neither the LightBurn license nor rotary is listed in this package.
55W LightBurn Package
$2,399.99
Machine + LightBurn license; rotary is not listed.
55W Rotary Package
$2,299.99
Machine + rotary attachment; LightBurn license is not listed.
55W LightBurn + Rotary Package
$2,499.99
Machine + rotary attachment + LightBurn license.

US names and prices checked October 20, 2026.

Before ordering

Three details worth getting in writing.

Tube warranty

Confirm the RF coverage

24 / 12 monthsRF / glass coverage listed on the product page

The general policy instead lists six months for 40–60W tubes. Ask which terms apply to your order.

Tube-life figures vary with power and are manufacturer estimates, not warranties or results from our shop.

Material clearance

Use the RF-specific height

115 mmRF height in the specification table and manual

The glass model lists 125 mm. The FAQ generalizes that height to both; do not plan a 125 mm object for RF without confirmation.

Enclosure and pass-through

The manual and product FAQ disagree.

The manual mentions pass-through doors; the FAQ says there are no openings. We cannot confirm a usable opening. The manual describes a Class I product when used as instructed, with a Class 4 laser inside. Follow the enclosure requirements.

Comparing P2S? LightBurn support has changed.

Polar 2 lists LightBurn and RDWorks V8. xTool’s October 10 notice documents P2S network operation with LightBurn 2.2.00 or later and current firmware. LightBurn calls its new xTool support Labs; its older June 29 firmware warning remains published. P3 is still unsupported. We have not tested the new connection.

If LightBurn was your reason to rule out P2S, revisit the supported features, camera placement, tube and cooling.

Current LightBurn compatibility guide · Compare Polar 2 with P2S and P3

Before checkout

Polar 2 prices when checked

50W RF Package

$4,999.99October 19, 2026

Air cooling, LightBurn and a basic rotary listed.

70W CO₂ Package

$3,699.99October 19, 2026

Water cooling, LightBurn and a basic rotary listed.

The crossed-out $7,599.99 and $5,199.99 are vendor compare-at prices, not independently verified MSRP. Checkout discounts, warehouse stock and delivery dates—including “ready to ship”—remain unconfirmed.

Affiliate disclosure: we may earn a commission at no extra cost to you.

Check current OMTech offer

Common questions

Polar 2 and Polar Lite questions

Is this an OMTech Polar 2 hands-on review?

No. We compared OMTech’s product pages and combined manual with the software publishers’ documentation, checked October 19, 2026. We have not tested Polar 2 or Polar Lite. Tube-life and speed figures are OMTech’s claims.

Should I choose the 50W RF or 70W glass Polar 2?

Based on the specifications, we would consider the 50W RF for fine engraving, air cooling and its longer estimated tube life. The 70W glass offers more rated power at a lower package price, with water cooling to maintain. We have not tested which finishes a given design faster or produces the better result.

What is included, and can I rely on the displayed shipping claim?

Both Polar 2 packages listed LightBurn and starter materials on October 19, 2026; the product FAQ also listed a basic rotary. Filtration is separate. We have not confirmed stock, delivery dates or coupon eligibility. Polar Lite has four different packages, and its page showed both early-November and one-business-day shipping messages. Confirm your package and shipping date before ordering.

Is Polar Lite just a cheaper Polar 2?

Polar Lite is a separate 55W machine with a smaller 510 × 300 mm work area, versus 710 × 360 mm on Polar 2. It lists a 400 × 7 mm front/rear opening. Its four packages include different software and rotary combinations. Polar 2 RF cooling and tube-life figures do not apply to Lite.

Does Polar 2 have pass-through doors, and is it Class I or Class 4?

The product FAQ says Polar 2 has no front or rear openings, but the combined manual mentions pass-through doors in its safety text. We cannot confirm a usable opening from that conflict. The manual calls the complete product Class I when used as instructed and the embedded laser Class 4. Follow the enclosure requirements; the two classifications describe different things.

Are the tube-life estimates the warranty?

No. Expected tube life is an estimate, not a warranty or replacement schedule. The Polar 2 page lists 24 months for the RF tube and 12 months for glass, but the general warranty page lists six months for 40–60W tubes. Get the RF coverage on your order confirmed in writing. The two-year machine warranty is separate.

Where does Polar 2 fit against xTool P2S or Glowforge?

Compare the laser tube, work area, cooling, camera placement and included accessories. LightBurn is no longer an OMTech-only advantage over P2S: xTool documents P2S network operation with LightBurn 2.2.00 or later and current firmware, while LightBurn labels that support Labs. P3 remains unsupported. We have not tested the new xTool connection.

Sources used for this guide

Weighing Bambu's new R1 instead? See the Bambu Lab R1 vs OMTech Polar 2 comparison.