Makera’s public A1S preview Manufacturer imagery
The Crafty Catsman · Launch preview
Makera A1S.
Desktop metal cutting
with automatic tool changes.
What Makera is bringing to the bench
Automatic
tool changes.
Camera-assisted
setup.
Makera’s public A1S preview sets the launch for November 18, 2026, at 7:00 AM PST. It highlights a 12-place automatic tool changer, minimum quantity lubrication, and camera-assisted setup with probing. We haven’t tested A1S; this first look follows Makera’s preview. Our full deep dive will follow here.
Our A1S launch coverage
Get the details
when they go live.
Makera has given us early access to launch information. We’re preparing the full A1S guide and will share the details here as they become public.
Affiliate link: we may earn a commission on qualifying purchases, at no extra cost to you.
One email when our full A1S guide is published.
From our Z1 Pro bench
Will the A1S replace the Z1 Pro in our workshop?
I can’t wait to explore that question with you all.
We have and love the Z1 Pro. It’s in our workshop, and our Z1 Pro bench log shows what we’ve made with it. Makera supplied that machine and its accessories for evaluation. We may buy an A1S for a future review; we haven’t acquired or tested one.
What Makera has shown
From lining up stock
to changing cutters.
Here’s where the new features could save work: positioning the stock, swapping cutters and lubricating the cut.
01 / 04Stock-probing previewMakera · Manufacturer preview
02 / 04Automatic tool change previewMakera · Manufacturer preview
03 / 04Lubrication system previewMakera · Manufacturer preview
04 / 04Material-cutting previewMakera · Manufacturer preview
Line up the stock
Find your stock before you cut.
Getting a CNC job lined up takes care. Makera’s preview pairs a camera for locating the stock with a probe for mapping its surface. We’re asking how much alignment it handles automatically.
Change tools
Let the machine change cutters.
Roughing, drilling and finishing can require different tools. Makera shows a 12-place automatic changer, so the next cutter can be selected without a manual swap. We’ll look at how that works across a complete job.
Lubricate the cut
Put lubricant where the tool is cutting.
Makera’s public preview describes a fine mist at the cut and claims better surface finish and longer tool life. We haven’t tested those claims.
Read Makera’s public MQL claimMake the part
Aluminum, brass and steel.
Those are the metals in Makera’s public preview. For a useful comparison, we’ll need more than a list: the alloy, cutter, settings, finish and time taken to make the part.
Source: Makera A1S public launch page, checked November 12, 2026.
Makera’s public demonstration
Watch the A1S
change tools.
Next up · Our full A1S guide
Things we’re excited
to learn about.
From the first setup to the finished part, here’s what we can’t wait to explore. We’re asking Makera these questions and will share the answers as details become public.
Working space
How much room do we have?
How much usable cutting space remains with clamps and a cutter installed?
Camera alignment
How much can the camera do?
What can the camera align automatically, and what still needs your input?
Tool changes
A complete job, start to finish.
How does a multi-tool job run from initial setup to the finished part?
Metal cutting
Which cuts are practical?
Which cutters, settings and run times support the metal-cutting claims?
Our workshop
Where would A1S fit?
Where does A1S fit beside the other desktop CNCs we cover?
The Crafty Catsman · A1S updates
Get notified when
our A1S guide is live.
One email when our full Makera A1S guide is published. We’ll update this page, so you can bookmark it too.











