Kickstarter is live · October 15, 2026
ToolDance X1
bundles & add-ons.
Eight launch bundles. One place to compare what’s included—and plan the extras for your workshop.
Read our full X1 feature →Sponsored. Paid partnership with ToolDance. This guide reports the company’s announced prices and contents. I haven’t tested the X1 or these add-ons.
The live launch range: $2,999–$8,894.
ToolDance’s eight Super Early Bird X1 rewards run from $2,999 to $8,894 before shipping, checked October 15, 2026. Every single-machine bundle includes three tools, three adapters, a probe and setup clamps. Rotary modules and chip-management equipment vary by reward. Compare the contents first, then add accessories; eligible VIP cashback is refunded separately.
The starting equipment
Every X1 starts with this.
Every single-machine reward includes the same standard set. Twin Pack includes two sets.
See the complete standard equipment list
- 1 × ToolDance X1
- 3 × Basic Tool Kit cutting tools
- 3 × Basic Tool Kit tool adapters
- 1 × Wireless 3D Touch Probe
- 4 × Setup Clamp Kit clamps
- 1 × ATC Loading Tool
- 1 × Power cord
- 1 × USB data cable
- 1 × Safety glasses
This Basic Tool Kit is separate from the optional six-tool milling kits. A vise and material stock are not listed in the reward contents.
ToolDance X1 · Launch rewards
Compare the eight launch bundles
Choose a reward to see its listed equipment. Clean-Cut bundles include dust collection; Flood bundles include flood cooling. Ultimate adds both separate rotary modules.
Rotary modules in this reward
No rotary expansion module is listed with the base X1.
No dust-collection or flood-cooling module listed.
Your selected reward
ToolDance X1
$2,999USD pledge
Before shipping & VIP cashback
- Machines
- 1 × ToolDance X1
- Rotary modules
- None listed
- Chip management
- Neither dust nor flood module listed
Includes one set of the standard equipment listed above. The precision vise, handwheel, nine-adapter sets, optional milling kits and material packs remain separate.
Selected ToolDance X1. $2,999 US dollars before shipping and VIP cashback. 1 machine.
Your configuration
Your bundle and extras
Select a bundle above and optional packages below. This is a planning subtotal; choose the reward and add-ons again on Kickstarter.
Browse all 21 add-ons ↓- X1 base
- $2,999
- 0 optional packages
- $0
- Planning subtotal USD · before shipping
1 machine · 1 listed probe
Paid partnership and affiliate link. We may earn a commission on qualifying pledges, at no extra cost to you.
Make room for what you’ll make
All 21 optional add-ons.
Expand a category to see its packages and contents. Modules already in your bundle are marked Included. The two-probe pack, six-tool milling kits and adapter sets are separate packages.
USD campaign prices checked October 15, 2026. MSRP is ToolDance’s advertised reference price, not a verified past selling price.
Additional machine1 packageExplore
| Pick | Package & contents | USD |
|---|---|---|
| Additional ToolDance X1 One additional ToolDance X1 machine listing. A separate $3,199 add-on listing, distinct from the $2,999 entry reward and its possible later VIP cashback. Confirm the additional machine’s exact supplied equipment before pledging. | $3,199MSRP |
Axis expansion2 packagesExplore
| Pick | Package & contents | USD |
|---|---|---|
| 4-Axis Expansion Module One 4-axis expansion module. Included workholding, software entitlement, mounting needs, and usable work envelope were not itemized. | $699MSRP | |
| 5-Axis Expansion Module One 5-axis expansion module. Do not assume this module replaces the separate 4-axis module or includes the same workholding. | $1,099MSRP |
Cooling, dust & chips2 packagesExplore
| Pick | Package & contents | USD |
|---|---|---|
| Dust Collection & Filtration Module One dust collection and filtration module. The live October 15 campaign lists $599, matching the October 12 announcement. The September 28 ToolDance quote was $499 and is retained as dated history. | $599MSRP | |
| Flood Cooling & Chip Management Module One flood cooling and chip management module. Coolant type, included consumables, maintenance needs, and ongoing costs were not stated. | $799MSRP |
Manual control1 packageExplore
| Pick | Package & contents | USD |
|---|---|---|
| MPG Handwheel One MPG handwheel. The announcement did not state additional control, connection, or compatibility specifications. | $129MSRP |
Workholding1 packageExplore
| Pick | Package & contents | USD |
|---|---|---|
| 3.5-inch Precision Toolmaker’s Vise One 3.5-inch precision toolmaker’s vise and one hex wrench, as listed on the campaign. The included hex wrench does not establish mounting compatibility, jaw capacity or measured accuracy. | $179MSRP |
Tool adapters9 packagesExplore
| Pick | Package & contents | USD |
|---|---|---|
| Metric Tool Adapter Set (9 Adapters) Nine adapters: four 4 mm, four 6 mm, and one 8 mm. The interface and third-party compatibility were not described, and a 10 mm adapter was not listed in this set. | $179MSRP | |
| Imperial Tool Adapter Set (9 Adapters) Nine adapters: four 1/4 inch, three 1/8 inch, one 3/16 inch, and one 5/16 inch. The adapter interface and third-party compatibility were not described. | $179MSRP | |
| 4 mm Tool Adapters (6-Pack) Six 4 mm tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP | |
| 6 mm Tool Adapters (6-Pack) Six 6 mm tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP | |
| 8 mm Tool Adapters (6-Pack) Six 8 mm tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP | |
| 5/16-inch Tool Adapters (6-Pack) Six 5/16-inch tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP | |
| 3/16-inch Tool Adapters (6-Pack) Six 3/16-inch tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP | |
| 1/8-inch Tool Adapters (6-Pack) Six 1/8-inch tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP | |
| 1/4-inch Tool Adapters (6-Pack) Six 1/4-inch tool adapters. The adapter interface and third-party compatibility were not separately detailed. | $119MSRP |
Milling kits2 packagesExplore
| Pick | Package & contents | USD |
|---|---|---|
| Advanced Milling Kit Campaign-listed six AlCrN-coated cutters and six adapters: 6, 4 and 2 mm flat end mills; 4 and 2 mm ball end mills; and a 4 mm 90-degree chamfer mill. The campaign lists the same six cutter geometries as the Starter kit, with AlCrN rather than DLC coating. Coating alone does not establish cutting performance or tool life. | $249MSRP | |
| Starter Milling Kit Campaign-listed six DLC-coated cutters and six adapters: 6, 4 and 2 mm flat end mills; 4 and 2 mm ball end mills; and a 4 mm 90-degree chamfer mill. The campaign lists the same six cutter geometries as the Advanced kit, with DLC rather than AlCrN coating. This optional six-tool kit is separate from the included three-tool Basic Tool Kit. | $209MSRP |
Probing1 packageExplore
| Pick | Package & contents | USD |
|---|---|---|
| Wireless 3D Touch Probe (2-Pack) Two wireless 3D touch probes. Accuracy, repeatability, battery details, service life, and third-party compatibility were not stated. | $79MSRP |
Material bundles2 packagesExplore
| Pick | Package & contents | USD |
|---|---|---|
| Starter Material Bundle Six pieces: 6061 aluminum and white acetal (POM), each with one 70 × 70 × 70 mm piece and two 150 × 100 × 10 mm pieces. Material certifications, tolerances, surface condition, and shipping weight were not stated. | $59MSRP | |
| Advanced Material Bundle Four pieces: two 304 stainless steel pieces at 100 × 100 × 8 mm and 150 × 100 × 10 mm, plus two Grade 5 titanium pieces at 100 × 100 × 6 mm and 150 × 100 × 10 mm. Material certifications, tolerances, surface condition, and shipping weight were not stated. | $169MSRP |
Before you pledge
The price is a pledge.
Shipping comes later.
Shipping & taxes
Shipping is collected separately after the campaign. ToolDance plans duties/taxes-paid shipping for supported destinations, including applicable VAT or sales tax. Check the campaign’s rates and terms for your destination and configuration.
VIP cashback
Eligible VIPs pledge the full price first. ToolDance says it will refund $200 per single-machine bundle or $400 for Twin Pack after successful campaign completion and verification. The $30 VIP deposit is refunded separately. Add-ons do not qualify for additional cashback.
Timing & warranty
The reward cards estimate March 2027 delivery; the FAQ describes a target to begin shipping that month. Arrival can vary. ToolDance advertises a one-year warranty. Crowdfunding rewards and delivery dates are not guaranteed.
From stock to setup
Choose the material before the extras
The two stock bundles have different contents. Their names describe the packages; they don’t establish your machining results or a complete setup.
Starter Material Bundle · $59
Six pieces: 6061 aluminum and white acetal (POM), each with one 70 × 70 × 70 mm piece and two 150 × 100 × 10 mm pieces.
Six pieces total. Dimensions are manufacturer-listed, in millimeters.
Advanced Material Bundle · $169
Four pieces: two 304 stainless steel pieces at 100 × 100 × 8 mm and 150 × 100 × 10 mm, plus two Grade 5 titanium pieces at 100 × 100 × 6 mm and 150 × 100 × 10 mm.
Four pieces total. This listing does not establish cutting parameters, finish quality or tool life.
Match cutters, adapters and workholding
The metric and imperial nine-piece adapter sets are different assortments. Seven other listings are six-packs of one size. Choose around the shanks you actually intend to use.
The catalogue has no 10 mm adapter pack. Confirm compatibility with the cutters you intend to use.
Before you choose a reward
Take your shortlist to Kickstarter.
Your selections here do not transfer to Kickstarter. Use them to choose your reward and optional packages, then check shipping for your destination. For the machine and software, return to the full X1 guide.
Paid partnership and affiliate link. We may earn a commission on qualifying pledges, at no extra cost to you.
View pricing and options hereOpens Kickstarter in a new tab. Your selections stay here.
ToolDance X1 bundle questions
How many ToolDance X1 bundles and add-ons are listed?
The live October 15, 2026 campaign lists eight Super Early Bird rewards and the 21 accessories first announced October 12. The accessories include an additional X1, rotary modules, chip-management systems, controls, workholding, adapters, cutters, probes and stock. You do not need every listing.
Is the $2,799 VIP figure the same as the $3,199 additional X1?
No. The entry X1 reward requires a $2,999 pledge before shipping. Eligible VIPs can receive $200 cashback later, making $2,799 an effective price after that refund. The $3,199 Additional ToolDance X1 is a separate add-on. The $30 VIP deposit is refunded separately.
What do all 21 accessory rows total?
Adding each manufacturer-listed accessory row once produces $8,659, with prices rechecked October 15. This includes the $3,199 additional X1 and overlapping adapter packages, so it is a catalogue check rather than a recommended setup. It excludes a primary reward, shipping and any later VIP refund.
What does MSRP mean in this guide?
MSRP means the reference price advertised by ToolDance in the October 12 announcement. It is not an independently observed retail price or proof that an item previously sold at that amount. Savings and discount percentages only compare the listed price with that dated manufacturer-advertised MSRP.
Why does the dust module show both $599 and $499?
The live October 15 campaign lists the dust module at $599, matching the October 12 announcement. Our main X1 guide preserves ToolDance’s September 28 quote of $499. The planner uses today’s $599 listing; the earlier $499 remains visible as dated history.
What is included with every single-machine X1 bundle?
Each includes one X1, a Basic Tool Kit with three tools and three adapters, one wireless 3D touch probe, four setup clamps, an ATC loading tool, power cord, USB data cable and safety glasses. The optional six-tool milling kits, nine-adapter sets, vise, handwheel and material packs are separate.
Do pledge prices include shipping, taxes and guaranteed delivery?
Shipping is collected after the campaign. ToolDance plans duties-and-taxes-paid shipping for supported destinations, including applicable duties, VAT and sales tax; confirm your destination and final charge. March 2027 is the estimated shipping start, not guaranteed delivery. Check the campaign’s warranty terms separately.
Does Ultimate include everything, and is Twin Pack two Ultimate bundles?
Ultimate includes both separate rotary modules but only its named dust or flood system. Twin Pack includes two machines and two sets of standard equipment, with one each of the 4-axis, 5-axis, dust and flood modules. Those four modules are not doubled, and the optional tooling and material packs remain separate.
How do the Starter and Advanced Milling Kits differ?
Both campaign listings contain six cutters in the same sizes and shapes, plus six adapters. ToolDance lists DLC coating for the $209 Starter kit and AlCrN coating for the $249 Advanced kit. Each has three flat end mills, two ball end mills and a chamfer mill. These are separate from the included three-tool Basic Tool Kit; the coating descriptions are not our test results.
Checked against the live campaign
Sources, dates and package details
The 21 accessory rows retain their original October 12 announcement and graphic references. All 21 prices and the eight reward lists were rechecked on Kickstarter on October 15, 2026; milling-kit and vise contents were updated from those listings. Shipping and VIP terms come from the campaign FAQ. Advertised MSRPs remain dated manufacturer reference prices, and the September dust-module quote remains visible as history.
- ToolDance X1 live Kickstarter rewards and add-ons — checked 2026-10-15.
- ToolDance X1 Kickstarter campaign FAQ — checked 2026-10-15.
- ToolDance X1 add-ons announcement — checked 2026-10-12. Original October 12 announcement; group access may be required.
- ToolDance X1 VIP offer — checked 2026-10-12.
- ToolDance X1 CNC guide and source notes — checked 2026-10-12. Includes the dated September 28 manufacturer clarification.
Download the bundle and add-on reference (JSON). Includes USD amounts, quantities, stated contents and source dates.
X1 and module images supplied by ToolDance. The materials scene is an editorial illustration. I haven’t tested these packages. How we report and review products.