Milwaukee’s New M18 3/4-Inch Impact Wrenches Start at $499
Milwaukee announced standard- and extended-anvil M18 FUEL 3/4-inch impact wrenches with 2,000-foot-pound claims, ONE-KEY, and prices from $499.
Milwaukee’s new M18 FUEL 3/4-inch impact wrenches are the standard-anvil 2964-20 at $499 bare and six-inch extended-anvil 2969-20 at $599 bare. Milwaukee claims 2,000 foot-pounds of nut-busting torque for both. The product page still says coming soon, and The Crafty Catsman has not tested either tool.
ReportMilwaukee Tool
Choose the anvil for the job before choosing the $499 or $599 bare tool
Milwaukee’s August 13 announcement adds two M18 FUEL 3/4-inch high-torque impact wrenches with ONE-KEY. The standard-anvil 2964-20 is listed at $499 bare or $849 as the 2964-22 kit; the six-inch extended-anvil 2969-20 is $599 bare or $949 as the 2969-22 kit. Each kit includes two FORGE XC8.0 batteries, an M18/M12 rapid charger, and storage or handling accessories. Milwaukee claims both tools deliver up to 2,000 foot-pounds of nut-busting torque, 1,800 foot-pounds of fastening torque, and removal speed up to 40% faster than cordless and pneumatic competition. Those claims have not been independently tested here.
The standard anvil is the broad fastening choice; the six-inch anvil is specifically for reaching deep commercial wheel hubs. Existing M18 owners should compare the bare-tool price with the two-battery kit only after confirming the exact anvil and live stock. The official 2969-20 page still says coming soon, so an announcement price is not proof that a seller can deliver it today.
The anvil decision matters more than the shared torque headline
Both models are rated by Milwaukee at up to 2,000 foot-pounds nut-busting torque, 1,800 foot-pounds fastening torque, and 2,000 maximum RPM. The 2964-20 uses a standard anvil plus AUTO SHUT-OFF and Bolt Removal Mode. The 2969-20 weighs 9.3 pounds bare, uses a six-inch extended anvil, and adds Lug Nut Snug Mode. Both provide four-mode control, ONE-KEY, battery isolation, and full M18 battery compatibility.
A specialist heavy-service purchase: These tools target commercial vehicles, structural steel, large pipe flanges, utilities, and fleet tire service. A lighter or lower-torque impact may be the better purchase for general automotive or workshop fastening. Milwaukee’s claims and prices are official, but live availability and independent speed, torque, and runtime results remain open.
- When will authorized sellers show live 2964 and 2969 stock?
- How do the torque, speed, vibration, and battery claims compare in independent testing?
Wait for a live listing if:You need the tool immediately or want independent proof before spending $499 to $949.
Shortlist the right model if:Your work genuinely needs 3/4-inch heavy-duty fastening and either the standard anvil or six-inch reach.
Milwaukee 2964 and 2969 — announced configurations
| Spec | Milwaukee Tool 2964-20 | Milwaukee Tool 2969-20 |
|---|---|---|
| Anvil | Standard | 6-in. extended |
| Bare-tool price | $499 | $599 |
| Two-battery kit | $849 | $949 |
| Stated nut-busting torque | 2,000 ft-lb | 2,000 ft-lb |
| Stated fastening torque | 1,800 ft-lb | 1,800 ft-lb |
| Special control | AUTO SHUT-OFF / Bolt Removal | Lug Nut Snug Mode |
| Availability | Announcement published | Product page says coming soon |
Sources: Milwaukee Tool official specs, Milwaukee Tool official specs
Primary pages and records used for this report.
Frequently Asked Questions
How much are Milwaukee’s new 3/4-inch impact wrenches?▼
Milwaukee lists the standard-anvil 2964-20 at $499 bare and the extended-anvil 2969-20 at $599 bare. The two-battery kits are $849 and $949. Confirm a live authorized-seller listing before ordering.
What is the difference between 2964-20 and 2969-20?▼
The 2964-20 uses a standard anvil for broad heavy fastening. The 2969-20 adds a six-inch extended anvil for deep commercial wheel hubs and uses Lug Nut Snug Mode.
Are the new Milwaukee impact wrenches available now?▼
Milwaukee has announced the tools and prices, but the official 2969-20 product page still says coming soon. Confirm current stock with an authorized seller.
Are the 2,000-foot-pound claims independently verified?▼
No. Torque, speed, and battery-runtime figures in this report are Milwaukee’s claims, not independent test results.
Have a launch, correction, or test opportunity?
Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.
Choose the useful next step.
Know what changed before it changes your workshop.
When a source-backed change affects what to buy, update, test, or ignore, we send a short decision brief with the evidence, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal works