Skip to main content
UV PrintingBriefing

Morpho Late Pledges: Higher Prices, Unsettled Shipping Plans

Short answer

Morpho’s campaign closed October 14; F1080/i3200 late pledges cost $2,159/$3,999 with May 2027 estimates. Its November 6 update reviews production and shipping without a new date. The planned CIS change narrows width to about 310–320 mm; flexible white remains in testing. Refund completion is Morpho’s unverified claim, and production quality, service and delivery remain unproven.

By The Crafty CatsmanPublished Updated
1

ReportMorpho and Kickstarter

What changed after the campaign closed

Kickstarter’s project data shows Morpho’s desktop UV printer campaign ended successfully on October 14, 2026 at 10:59 a.m. EDT, against a $50,000 goal. Late pledges are open: the F1080 Standard Pack is $2,159 and the i3200 Pro Pack $3,999, with the Pro Workflow and Pro Deluxe bundles at $5,199 and $5,999, all with an estimated delivery of May 2027. The campaign’s final KS Special rewards were $1,999 and $3,299, estimated for December 2026, after Early Bird rewards of $1,799 and $2,999 that ended September 17, according to the Internet Archive’s October 9 copy of the campaign. Kickstarter showed $10,482,180 from 2,930 backers on November 9, a total that includes late pledges; Morpho describes the result as “$10M+ Funded by 2,900+ Backers.”

Why it matters

A late pledge is a costlier and later bet than the campaign rewards: by the site’s arithmetic, $160 more for the Standard Pack and $700 more for the Pro Pack, with delivery estimated five months later. Late-pledge ink add-ons cost more too: $32 for each 290 mL white, flexible white or varnish bottle (campaign: $24), $74 for the 130 mL × 4 CMYK set (campaign: $56) and $414 for the three-set ink bundle (campaign: $285), about a third more and, for the bundle, about 45% more. Morpho’s November 6 update says its flexible white ink, designed for materials that bend such as leather, is still being tested, while Kickstarter lists the $32 flexible-white bottle as an available late-pledge add-on with a May 2027 estimate. The campaign’s F1080 and i3200 printhead modules ($399 and $1,399) are not offered to late pledgers, so a late pledger cannot add a spare printhead; the late-pledge rewards list a 1-year printer warranty and a 90-day printhead warranty on the F1080 or 180 days on the i3200. Morpho’s site now labels $2,159 and $3,999 its “Kickstarter Price” against an MSRP of $2,699 and $4,999, and its Store and “Secure Yours Now” links go to the Kickstarter campaign; those are campaign prices, not retail prices. A pledge is not the same as buying an in-stock retail printer, and manufacturing, print quality, software reliability, support, and delivery remain unproven.

What the close changes for a buyer+

Morpho’s update posted October 16 describes a hardware change for the shipping version: a compact CIS module replaces the small micro camera on the printhead carriage and works alongside the Stereo Vision system rather than replacing it, and the maximum print width drops from 330 mm to approximately 310–320 mm, with the exact dimension still being finalized. Morpho’s website specification table still lists a 330 × 220 mm enclosed area and a 420 × 330 × 138 mm area with the A3 printbed. That October 16 update said Morpho was moving into its next stage, including mass production, had fixed bugs in Snapshot and Smart Alignment, and would send a backer survey through Kickstarter’s Pledge Manager to confirm the final shipping address, applicable taxes for certain countries or regions, and add-ons. Its November 6 update says that, with the latest CIS system being incorporated and production-line preparations underway, Morpho is reviewing its production ramp-up and shipping plans to give a more accurate timeline, and it names no date; Kickstarter’s project data showed no survey sent as of November 9. The same update says Morpho’s latest software supports bidirectional printing, printing in both directions of travel to cut print time, while it refines calibration and evaluates print quality; Morpho first listed a bidirectional print option on September 2, so this is a status report, not a new feature, and the site has no speed or quality figure for it. When the site read Morpho’s Kickstarter FAQ on August 24, 2026, Morpho said internet access is required for installation, activation, and cloud features, while routine local printing can work offline after setup. Those are campaign specifications and workflow claims, not results from an independently tested production unit.

Treat the pledge as an early manufacturing commitment: A late pledge arrives before independent production-unit evidence or normal retail fulfillment, at a higher price than the campaign rewards. The late-pledge reward text says customs duties and VAT are included, while Morpho’s update says the backer survey will confirm applicable taxes for certain countries or regions, so confirm shipping, taxes and the final total in Kickstarter’s pledge flow before pledging. Campaign backers should watch for that survey. For deposit holders, Morpho’s October 16 update expected refunds within 10 business days after the campaign ended; on November 6 Morpho said it has completed the batch refund process for deposit holders who paid their pledges in full, including those who completed their first Pledge Over Time payment, and that backers still paying through Pledge Over Time received an adjustment that reduces one or more remaining scheduled payments. The site has not verified individual refunds, so check your Kickstarter account and payment schedule. Judge the complete landed pledge, including ink, maintenance, and the risk of delay, not the machine figure alone.

What remains open:
  • What will the final maximum print width be, and will the area with the A3 printbed shrink with it?
  • How long will late pledges stay open, and what shipping charge and taxes will Kickstarter’s pledge flow show for each destination?
  • When will Morpho publish the revised production and shipping schedule it says it is preparing, and will the December 2026 and May 2027 estimates move?
  • Has every eligible deposit holder received the refund or payment adjustment Morpho describes? The site has not verified individual refunds.
  • Are the flexible-white bottles offered as add-ons the formulation Morpho says it is still testing, and when will that testing end?
  • What will production-unit print quality, alignment accuracy after the CIS change, software stability, and support look like after fulfillment begins?

Wait for retail or production evidence if:You need a guaranteed delivery date, the full 330 mm print width, proven output quality, mature software, established support, or a predictable total operating cost.

Consider a late pledge only if:You can accept a May 2027 estimate, crowdfunding delay, and execution risk after confirming the exact reward, shipping, taxes, warranty route, and included supplies in Kickstarter’s pledge flow.

Morpho’s late-pledge terms and stated specifications

SpecMorpho Standard F1080Morpho Pro i3200
Late pledge (November 9)$2,159 (Standard Pack)$3,999 (Pro Pack)
Final KS Special reward (closed)$1,999$3,299
Early Bird reward (ended September 17)$1,799$2,999
Estimated deliveryMay 2027 for late pledges; December 2026 for campaign rewardsMay 2027 for late pledges; December 2026 for campaign rewards
Production and shipping plan (Morpho, November 6)Under review; no new date givenUnder review; no new date given
PrintheadF1080i3200
Printhead warranty (late-pledge reward text)90 days180 days
Maximum print width330 mm listed; about 310–320 mm planned for shipping units, not final330 mm listed; about 310–320 mm planned for shipping units, not final
Area with A3 printbed (Morpho’s table)420 × 330 × 138 mm420 × 330 × 138 mm
Independent production-unit testingNot establishedNot established

Sources: Morpho official specs

The decision after the close

Read the late-pledge terms before you read the machine.

The campaign ended on October 14. A late pledge costs more than the campaign’s final rewards and carries a May 2027 delivery estimate, so the exact reward, shipping, taxes, and fulfillment risk control the real commitment.

The late-pledge terms control.

The useful move

Treat the pledge as an early manufacturing commitment.Consider a late pledge only if you can accept crowdfunding delay and execution risk after confirming the exact reward, shipping, taxes, warranty route, and included supplies in Kickstarter’s pledge flow.
Morpho campaign key visual
Morpho’s campaign key visual of its desktop UV printer, white with a dark front window and a Morpho logo, with composited sample prints arranged above and beside it, including a book cover, a football, a carved panel, coasters and a tray, on a light background
Morpho’s campaign key visual, a marketing composite with sample prints, from before the CIS change Morpho announced on October 16; the samples are Morpho’s marketing, not tested output. Cropped to leave out Morpho’s slogans.

Frequently Asked Questions

Can I still get the Morpho UV printer after the Kickstarter ended?▼

Yes, through Kickstarter late pledges. The campaign closed on October 14, 2026. On November 9 the F1080 Standard Pack late pledge was $2,159 and the i3200 Pro Pack $3,999, against $1,999 and $3,299 for the campaign’s final KS Special rewards and $1,799 and $2,999 for the launch Early Bird rewards. The late-pledge reward text says customs duties and VAT are included, but Morpho’s update posted October 16 says its backer survey will confirm applicable taxes for certain countries or regions. Check shipping, taxes, and the final charge in Kickstarter’s pledge flow.

When does Morpho expect to deliver the printer?▼

Morpho has not given a new date. Its November 6, 2026 update says it is reviewing its production ramp-up and shipping plans while it incorporates its latest CIS imaging system and prepares its production line, and that it will share a clearer schedule as soon as it is ready. Kickstarter’s reward estimates are still May 2027 for late pledges and December 2026 for campaign rewards. The site reads both as crowdfunding estimates that may move, not delivery guarantees, and final arrival can also depend on freight, customs, and local handoff.

Has Morpho paid the deposit refunds?▼

Morpho says it has completed the batch refund process for deposit holders who paid their pledges in full, including those who completed their first Pledge Over Time payment. For backers still paying through Pledge Over Time, Morpho says Kickstarter applies the adjustment for their Extra Saving and deposit by reducing one or more remaining scheduled payments rather than issuing a separate refund, and that “the total adjustment may be higher than $250 for some backers, including those who selected the Kickstarter Special reward tier or made multiple deposits.” Check your Kickstarter account and payment schedule for your exact amount; the site has not verified individual refunds.

Did Morpho change the printer after the campaign?▼

Morpho’s update posted October 16 says the shipping version will replace the small micro camera on the printhead carriage with a compact CIS module that works alongside its Stereo Vision system. It also says the maximum print width will shrink from 330 mm to about 310–320 mm and that the exact figure is still being finalized; its November 6 update says the latest CIS system is being incorporated. Morpho’s website specification table still lists the 330 mm width.

Can the Morpho printer work offline?▼

When the site read Morpho’s Kickstarter FAQ on August 24, 2026, Morpho said internet access is required for installation, activation, cloud services, and updates, and that routine local printing can work offline after setup. The company’s software demonstrations and production reliability have not been independently verified.

Is this Morpho report based on hands-on testing?▼

No. This report separates Morpho’s campaign claims and Kickstarter’s campaign terms from what remains unknown, and The Crafty Catsman has not tested a Morpho printer. Print quality, maintenance, software reliability, support, and fulfillment need production-unit evidence after shipping begins.

Media & product inquiries

Have a launch, correction, or test opportunity?

Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.

thecraftycatsman@gmail.com
Continue from here

Choose the useful next step.

UV Printing
Selective workshop updates

Know what changed before it changes your workshop.

When a source-backed change affects what to buy, update, test, or ignore, we send a short decision brief with the evidence, the workshop consequence, and what remains unknown.

Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.

We’ll email a confirmation link first.Privacy details

Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.

See how The Workshop Signal works