Skip to main content
3D PrintingBriefing

AMS 2 Pro Feeder Replacements: Check Your Serial Number

Short answer

Bambu’s free AMS 2 Pro program replaces eligible remaining feeders from a May–July 2026 production batch; its serial checker decides eligibility regardless of seller. Replacement shipments are expected in three to five weeks. Bambu says normally working units can remain in use; contact support for gear powder or loading problems. Bambu calls this a service program.

By The Crafty CatsmanPublished
What Bambu announced

Free feeder units for one batch, decided by serial number

Who is coveredOne production batch, found by serial number

Bambu says the program covers a specific production batch it identifies through its production and quality records, described as feeder units made between May and July 2026; its serial-number check is final.

What you getReplacement feeder units and a discount code

Bambu’s forum notice promises four new feeder units and a $20 discount code; its wiki says Bambu supplies any units that have not already been replaced.

TimingBatches within three to five weeks

Bambu expects replacements to ship in batches within three to five weeks and a support ticket within one to two business days of registering; there is no deadline.

1

ReportBambu Lab

What eligible owners receive

Bambu’s AMS 2 Pro serial-number guide
Bambu’s AMS 2 Pro serial-location photo marks the frame’s AMS 2 Pro SN separately from the feeder unit’s Feeder SN.
Bambu’s guide marks the AMS 2 Pro serial number on the frame and the separate feeder serial number. Use the AMS 2 Pro number for the registration check; Bambu calls that form’s result the final eligibility decision.

Bambu Lab posted a service notice in its official forum on October 27 and published a wiki page, “Service Program for Feeder Units in Certain AMS 2 Pro Batches”, created October 26 and updated October 27. Bambu says users reported the gears on some AMS 2 Pro feeder units wearing out faster than expected, and that a batch of feeder units made between May and July 2026 “may not have had sufficient grease coverage during production”. It says the program covers a specific production batch identified through its production and quality records, that the issue is resolved and that units currently sold through its official stores are not affected; it messaged owners in the batch through MakerWorld and Bambu Handy. Anyone else can enter the AMS 2 Pro serial number, found on the frame or the printer’s screen, in Bambu’s AMS 2 Pro Feeder Unit Replacement Registration, whose result Bambu calls the final confirmation of eligibility. Units bought from resellers, second-hand or as gifts qualify if their serial number does. There is no registration deadline; Bambu processes registrations in order, expects to open a support ticket within one to two business days and expects to ship replacements in batches within three to five weeks.

Why it matters

The serial-number check decides coverage, not the purchase date, the store or the printer the unit came with: Bambu says units bought at the same time or in the same order can come from different batches. Bambu’s forum notice promises “4 brand new AMS 2 Pro Feeder Units, on us” with parts and shipping covered, plus a $20 discount code in the local-currency equivalent; its wiki says Bambu provides any remaining units that have not yet been replaced and none extra if all four were already replaced, and that owners who paid for replacement feeders can ask for a refund. Bambu calls it a service program. The U.S. CPSC recall database listed no AMS 2 Pro recall when checked on November 4, 2026; a search of its recall titles for “Bambu” returned only the June 2024 A1 printer recall. Devices outside the program keep normal warranty and service support, according to Bambu.

Using the AMS until the parts arrive, and what else Bambu promises+

Bambu says a working AMS 2 Pro can stay in use: if you have seen no problems, keep using it, register if the serial check confirms coverage, and when the replacements arrive swap them straight away or when the old units show wear. Contact Bambu support if you notice powder from worn feeder gears or filament loading and unloading problems. The replacement feeder units get a new three-month warranty from the day they arrive; the AMS 2 Pro and its other parts keep their existing warranty, and swapping the feeders yourself under Bambu’s instructions does not affect it. Old units do not need to be returned, and feeder units bought separately as spare parts are not part of the issue. Bambu says the issue involves only the AMS 2 Pro and does not affect normal use of the printer.

Who this reaches, and what to do if you are buying now: Bambu’s U.S. store sells the AMS 2 Pro on its own and includes it in the P2S Combo, the H2C, H2D, H2S and X2D AMS Combos, the H2C Laser Full Combo and an X2D bundle with two units (as of November 4); coverage follows the AMS 2 Pro’s own serial number, not the printer it came with, and Bambu’s notice names no bundle. If you are buying now, Bambu says units sold through its official stores are not affected, but it tells owners to check each serial number rather than rely on purchase date or order details, and some owners in Bambu’s forum thread say they are checking theirs anyway. If a newly bought unit is covered, Bambu says you can return or exchange it within the seller’s return window; units from resellers go back through the seller. The site’s own P2S Combo was bought at release in October 2025, according to our owner review, so its original feeder units predate the batch Bambu describes; Bambu’s form remains the final word.

What remains open:
  • How many units are affected; Bambu says it cannot say for sure.
  • Which serial-number ranges are covered; Bambu publishes only the registration form.
  • When individual shipments go out; Bambu gives a three-to-five-week batch window, not dates or queue positions.

Keep using it if:Your AMS 2 Pro works normally: Bambu says you can keep using it, register if the serial check confirms coverage, and swap the feeders when the replacements arrive or when the old ones show wear.

Register now if:You own an AMS 2 Pro from any store, second-hand or as a gift: run its serial number through Bambu’s registration form, because registrations are processed in order and Bambu calls the form’s result final.

AMS 2 Pro feeder service program — Bambu’s terms

TermBambu Lab AMS 2 Pro feeder unit service program
AnnouncedWiki page created October 26 and updated October 27; forum notice posted October 27
BatchFeeder units Bambu describes as made between May and July 2026, identified through its production and quality records
EligibilityThe AMS 2 Pro serial number in Bambu’s registration form; Bambu calls the result final
ReplacementsFour new feeder units in the forum notice; the wiki supplies any units not already replaced
Discount code$20 in the local-currency equivalent (forum notice)
ShippingIn batches within three to five weeks (Bambu’s expectation)
Support ticketWithin one to two business days of registering (Bambu’s expectation)
DeadlineNone; registrations processed in order
WarrantyNew three-month warranty on replacement feeders; the rest of the AMS 2 Pro unchanged
Old unitsNo return needed
Units affectedNot stated by Bambu

Sources: Bambu Lab service-program page

Your next step

Run the serial check for every AMS 2 Pro you own, wherever it came from.

Own an AMS 2 Pro?

Enter its serial number in Bambu’s AMS 2 Pro Feeder Unit Replacement Registration even if no message arrived; Bambu processes registrations in order. Bambu says the serial number is on the AMS 2 Pro frame or on the printer’s screen.

Buying an AMS 2 Pro or a combo now?

Bambu says units sold through its official stores are not affected, but it tells owners to check each serial number rather than rely on purchase date or order details. If a newly bought unit is covered, Bambu says you can return or exchange it within the seller’s return window.

Program record
  1. Bambu creates the service-program page

    Bambu’s wiki page “Service Program for Feeder Units in Certain AMS 2 Pro Batches” was created on October 26 and updated on October 27.

  2. Bambu posts its forum service notice

    Bambu’s support account posted “Service Notice for AMS 2 Pro Feeder Unit” in its official forum Announcements, promising four new feeder units, a $20 discount code and a fresh three-month warranty on the replacements.

Official sources

Primary pages and records used for this report.

Official program pageRead Bambu’s service-program pageOfficial source for the batch, the serial check, the timing, the warranty, refunds, returns and the comparison photo; it links Bambu’s registration form. Not an affiliate link.Official forum noticeRead Bambu’s forum service noticePosted October 27 by Bambu’s support account; the source for the four new feeder units and the $20 discount code. Not an affiliate link.Government recall databaseSee the CPSC recall-database searchReturns the database’s matching records as data; on November 4 it listed only the June 2024 A1 recall and no AMS 2 Pro recall. Not an affiliate link.Official store pageSee the AMS 2 Pro on Bambu’s U.S. storeShows the AMS 2 Pro sold on its own on November 4. Not an affiliate link.Official store pageSee the P2S page on Bambu’s U.S. storeLists the P2S Combo with an AMS 2 Pro included, read on November 4. Not an affiliate link.Official store pageSee the H2C page on Bambu’s U.S. storeSays the H2C AMS Combo includes one AMS 2 Pro, read on November 4. Not an affiliate link.Official store pageSee the H2D page on Bambu’s U.S. storeLists the H2D AMS Combo with an AMS 2 Pro included, read on November 4. Not an affiliate link.Official store pageSee the H2S page on Bambu’s U.S. storeLists the H2S AMS Combo with an AMS 2 Pro in the box, read on November 4. Not an affiliate link.Official store pageSee the X2D page on Bambu’s U.S. storeLists the X2D AMS Combo with an AMS 2 Pro and the X2D Print More Bundle with two, read on November 4. Not an affiliate link.

Frequently Asked Questions

How do I know whether my AMS 2 Pro is covered?▼

Enter its serial number in Bambu’s AMS 2 Pro Feeder Unit Replacement Registration. Bambu says the form’s result is the final confirmation and asks owners to check each serial number rather than rely on the purchase date or order details, because units bought together can come from different batches. The serial number is on the AMS 2 Pro frame or on the printer’s screen, and units bought from resellers, second-hand or as gifts qualify if their serial number does.

Should I stop using my AMS 2 Pro until the new feeders arrive?▼

Bambu says no, if it is working normally: keep using it, and once the new feeders arrive, swap them straight away or when the old ones show wear. Contact Bambu support if you notice powder from worn feeder gears or filament loading and unloading problems.

Media & product inquiries

Have a launch, correction, or test opportunity?

Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.

thecraftycatsman@gmail.com
Continue from here

Choose the useful next step.

Check your combo and your return options before you register or reorder.

3D Printing
Selective workshop updates

Get the next useful 3D printing update.

When a source-backed change affects what to buy, update, test, or ignore, we send a short decision brief with the evidence, the workshop consequence, and what remains unknown.

Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.

We’ll email a confirmation link first.Privacy details

Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.

See how The Workshop Signal works