Workshop news route
3D Printing News
3D printer launch news, Bambu Lab updates, slicer changes, and practical workshop printing signals.
Jun 9, 2026
24
13
Latest 3D Printing Stories
24 storiesBambu Lab A2L Day 8 — FauxHammer Full Review Published; Adam Savage's Tested Confirms PMSM Quality; AMS Lite Mitigation Community Standard; Print-then-Cut OTA Date TBD
Bambu A2L Day 8 Tuesday June 9 (catch-up from June 4 last digest): FauxHammer full review published — 'Large-Format Hobby Printing with a Smart Ecosystem.' Adam Savage's Tested A2L review via Jedi News confirms PMSM servo print quality. AMS Lite non-slip vibration mitigation is now community standard. Print-then-Cut OTA update date still unpublished. $469 base / $569 Combo stable.
Bambu SFC/AGPLv3 Day 8 — Committee Details 'Forthcoming June 2026'; baltobu $250K+; Violations Unresolved
Bambu Lab SFC/AGPLv3 dispute Day 8 Tuesday June 9: SFC standing committee details described as 'forthcoming in June 2026' — community watching for SFC announcement this week. baltobu fundraiser at $250K+ for AGPLv3 enforcement legal costs. Violations from June 1 backtrack unresolved. No manufacturer response to SFC committee formation.
Creality K3 KliTek Day 9 — Q3 2026 Timeline Stable; Community Week 1 Cost Analysis Complete on 80% Waste Reduction Claim
Creality K3 KliTek Day 9 Tuesday June 9 (catch-up from June 4 last digest): Q3 2026 timeline stable and unchanged. Community completes first full week of cost analysis on 80% filament waste reduction claim versus traditional AMS-style purge towers. K3's multi-color switching architecture is the central differentiation point under community evaluation.
Bambu A2L Day 7 Monday — Second Week Begins; AMS Lite Standard Settled; Print-then-Cut OTA No Date (One Full Week Confirmed)
Bambu A2L Day 7 Monday June 8: second week of ownership begins. AMS Lite vibration mitigation fully settled as community standard. Print-then-Cut OTA via Bambu Handy has no release date after one full week confirmed. Owner reports building from production use. Japan/Korea June 2 cohort data accumulating alongside US/EU.
Bambu SFC/AGPLv3 Day 7 — Monday Highest-Probability Announcement Window; Right-to-Repair Committee Launching June 2026; Two Violations Unresolved; baltobu Paid Staff Active
Bambu SFC/AGPLv3 dispute Day 7 Monday June 8: Monday is the highest-probability window for a corporate compliance announcement. Two violations remain open: libbambu_networking source not published; Bambu Connect restrictions. SFC right-to-repair 3D printer standing committee launching June 2026. baltobu paid staff now active across three Forgejo repositories ($250K+ fundraised).
Creality K3 KliTek Day 10 — Week 2 Monday; High-Volume vs Casual Segmentation Established; Q3 2026 Stable
Creality K3 KliTek Day 10 Monday June 8: Week 2 begins. High-volume vs casual user segmentation established and stable: 10+ jobs/week at 4 colors = $40–$80/year savings (purchase-decision relevant); 1–2 jobs/week at 2 colors = <$16/year (not decision-relevant). Q3 2026 release timeline stable. IPO $163M confirmed delivery commitment. Pricing still unpublished.
Bambu A2L Day 6 — First Full Week Completes Sunday; AMS Lite Standard; Print-then-Cut OTA No Date
Bambu A2L Day 6 Sunday June 7: first full retail week completes today. AMS Lite confirmed standard (not optional upgrade). Print-then-Cut OTA firmware update promised, no published date. Community evaluation of large-format multi-material workflow continues into week 2.
Bambu SFC/AGPLv3 Day 6 — Second Weekend No Compliance; Monday June 8 Next Window; baltobu $250K+
Bambu source code compliance (SFC/AGPLv3) Day 6 Sunday June 7: second weekend with no compliance submission. Monday June 8 is next practical business-day window for action. Community fundraising at baltobu has surpassed $250,000. Community pressure remains high; Bambu official response still pending.
Creality K3 KliTek Day 9 — Market Segmentation Crystallized; Q3 2026 Stable KliTek Platform; IPO $163M
Creality K3 KliTek Day 9 Sunday June 7: market segmentation crystallized — high-volume professional users vs casual single-material users. Q3 2026 stable KliTek platform release. Creality IPO filing at $163M valuation context. Community reception confirms clear buyer bifurcation around multi-material workflow complexity.
Bambu A2L Day 4 — First Owner Reports Publishing; AMS Lite Mitigation Standard; Day 4 Community Data
Bambu A2L enters Day 4 (Friday June 5). First owner reports beginning to publish — Day 4 is the earliest window for real user experience data. AMS Lite multi-material mitigation already standard among informed buyers: dual-roll bracket at $39 or manual swap at 0 cost. A4 bed (256×256mm) confirmed. Bambu ecosystem integration confirmed. Friday social media cycle amplifies early-adopter sharing.
Bambu SFC AGPLv3 Violation Watch Day 4 — End of First Work Week; Violations Unresolved
Bambu Studio firmware compiler (SFC) AGPLv3 violation watch enters Day 4 (Friday June 5). End of the first work week since violations were formally documented. No resolution, no public acknowledgment from Bambu Lab as of Friday morning. Compliance path: either release SFC source or relicense the affected AGPLv3 component. Community pressure building. OSS license enforcement precedents (Artifex, SFLC) suggest escalation path if unresolved through Q2.
Creality K3 KliTek Day 7 — Waste Math Quantified; Purge Tower vs Nozzle Wipe Comparison Live
Creality K3 KliTek multi-material system enters Day 7 (Friday June 5). Community waste math now quantified: purge tower method vs nozzle wipe comparison reports publishing. KliTek $249 add-on vs Bambu AMS Lite $169 ecosystem comparison becoming the standard reference for budget multi-material decisions. K3 $399 base + KliTek $249 = $648 total vs Bambu A1 Mini Combo $499. Waste quantification is the key differentiator data point.
Bambu Lab A2L Day 3 — 3druck.com: 'Large Installation Space at a Low Price, With Old Weaknesses'; Tom's Hardware Consensus 'H2S Lite at Half Cost' Holds; AMS Lite Advice Settling
A2L Day 3 June 4: 3druck.com published full hardware test — 'large installation space at a low price, with old weaknesses.' Two flagged weaknesses: open-frame design (no Class 1 enclosure) and no laser module. Tom's Hardware 'H2S Lite at half cost' remains editorial consensus. AMS Lite vibration mitigation (non-slip surface + stable platform) settling as standard community advice. Day 1 firmware patches confirmed; launch buyers on patched firmware.
Bambu Lab SFC/AGPLv3 Dispute Day 3 — Two Violations Unresolved; baltobu $250K+; June 2026 Standing Committee Details Still Forthcoming
SFC/AGPLv3 dispute Day 3 June 4: two violations (libbambu_networking source unpublished; Bambu Connect user restrictions) unresolved after June 1 backtrack. SFC June 2026 standing committee (manufacturers, users, licensing experts, monthly meetings) details still expected this month. baltobu fundraiser at $250,007+ with Paweł Jarczak collaborating and reverse-engineering active. A2L hardware launch concurrent.
Creality K3 KliTek / IPO Day 6 — Q3 2026 Timeline Confirmed Stable; Community Begins 80% Filament Waste Reduction Cost Analysis vs AMS
Creality K3 KliTek / IPO Day 6 June 4: Q3 2026 release confirmed stable. Community begins structured cost analysis of '80% filament waste reduction' claim — KliTek toolchanger (physical module swap, no purge) vs AMS-style (purge tower/line) at 4+ colors generates real per-print savings for high-volume operators. KliTek: 5-second nozzle swap, 37 sensors, ≤25μm repositioning, RFID. HK$1.272B IPO proceeds fund development.
Bambu Lab A2L Day 2 Post-Launch — First Wave of Third-Party Reviews Live: PMSM Benchy 38 Minutes; AMS Lite Vibration Concern Surfaced; Firmware Already Patched
Day 2 post-launch June 3: Tom's Hardware ('H2S Lite at half the cost of H2S'), All3DP, FauxHammer, 3druck.com all published A2L reviews. PMSM servo benchmark: 3D Benchy 38 minutes, no visible ringing — validates closed-loop servo + granular damper vibration compensation claims. Uncle Jessy (YouTuber): AMS Lite slowly shook itself off table due to printer vibration — setup mitigation required (non-slip surface, stable platform). Early firmware bugs patched during review period; Day 1 buyers on patched firmware.
Creality IPO Day 5 — K3 With KliTek Officially Confirmed June 1: 5-Second Nozzle Swap, 80% Filament Waste Reduction, Q3 2026; 12-Year Anniversary
IPO Day 5 June 3: Creality K3 with KliTek officially announced June 1 (concurrent with IPO). Confirmed specs: 5-second nozzle module swap; <15 seconds material switch; 80% filament waste reduction vs conventional multi-material; 37 sensors (12 tool-change dedicated); ≤25μm XYZ repositioning; dual nozzle (0.4mm + 0.8mm); TPU multi-color/multi-hardness; RFID filament recognition. Q3 2026 release. HK$1.272B IPO proceeds funding development. Creality 12-year anniversary milestone.
Bambu Lab SFC Dispute Day 2 — June 2026 Standing Committee Details Still Forthcoming; AGPLv3 Violations Remain Unresolved; baltobu Reverse-Engineering Active
Day 2 June 3: Bambu SFC AGPLv3 violations (libbambu_networking, Bambu Connect restrictions) unresolved after June 1 backtrack. SFC June 2026 standing committee (manufacturers, users, licensing experts, monthly meetings) details still expected this month. baltobu project active: $250,007+ fundraiser, Jarczak collaborator, reverse-engineering continues. A2L hardware launch concurrent with compliance story.
Bambu Lab A2L Day 1 Post-Launch — Full Specs Confirmed: $469 Base / $569 Combo; 330×320×325mm; 19 Filaments; PMSM Servo; Blade Cutter + Pen Plotter; No Laser (Open Frame)
Bambu A2L Day 1 post-launch (June 2): full specs confirmed. US $469 base / $569 Combo with AMS Lite. EU €379/$489. Build: 330×320×325mm (105% more than A1 256mm-class). Multi-color: 19 filaments (4 AMS + 1 AMS Lite). PMSM closed-loop servo (67% more force, grinding detection). 500mm/s. <49 dB silent. A1-compatible nozzles. Blade cutter + pen plotter modules. NO laser (open frame safety). Print-then-Cut OTA via Bambu Handy coming.
Creality IPO Day 4 — KliTek Confirmed: 5-Second Nozzle Swap, 80% Filament Waste Reduction, 37 Sensors, ≤25μm Repositioning; Q3 2026 Launch on Track
Creality IPO Day 4 stable. KliTek specs confirmed: 5-second nozzle module swap; <15 seconds complete material switch; 80% filament waste reduction vs conventional multi-material; 37 sensors (12 tool-change dedicated); ≤25μm XYZ repositioning accuracy; dual nozzle (0.4mm + 0.8mm); TPU multi-color/hardness; RFID filament recognition. Q3 2026 launch on track. HK$1.272B IPO proceeds funding development.
Bambu Lab SFC Dispute — June 2026 Standing Committee Details Forthcoming; AGPLv3 Violations Remain Unresolved After Backtrack; baltobu Project Active
Bambu SFC status June 2: two AGPLv3 violations (libbambu_networking, Bambu Connect restriction) unresolved after June 1 backtrack. SFC June 2026 standing committee details expected this month (manufacturers, users, licensing experts monthly meetings). baltobu project active: $250,007+ fundraiser, Jarczak collaborator, reverse-engineering continues. A2L hardware launch concurrent with compliance story.
Bambu Lab A2L Launches TODAY at 4 PM CEST — 'Creative Playground. Extra Large'; A-Series Multi-Color Bedslinger; Full Specs and Pricing Revealed This Afternoon
Bambu Lab A2L officially launches today (June 1, 2026) at 4 PM CEST. Full specs, pricing, and availability revealed at the event. Confirmed pre-reveal: 'Creative Playground. Extra Large' tagline, multi-color output, A-series open-frame bedslinger family. Community speculation entering reveal: 330×320mm build volume, PMSM closed-loop servo extruder, AMS/AMS Lite multi-color, pricing near A1 tier ($299–$559).
Bambu Lab Backtracks on SFC Legal Threat — Publicly Regrets C&D Reference 'Came Across as Legal Threat'; AGPLv3 Violations Still Confirmed; baltobu Continues
Bambu Lab publishes public statement: 'We regret that our reference to terms of service, legal context, and a potential C&D understandably came across as a legal threat.' The two SFC-confirmed AGPLv3 violations (incomplete source code; Bambu Connect user restrictions) are unchanged. baltobu reverse-engineering project continues. Jarczak remains a collaborator. $250,007 fundraiser active. June 2026 standing committee still planned.
Creality IPO Day 3 Post-Listing Stable — KliTek Nozzle-Changing Q3 2026 on Track; HK$1.272B Positions Creality as Best-Funded Consumer 3D Printer Company
Creality's Hong Kong Stock Exchange listing enters Day 3 (Monday June 1) — first full Monday trading after the May 29 listing. IPO: 3,829× oversubscribed, +80% first day, HK$1.272B net proceeds. KliTek nozzle-changing multi-material technology (RFID + S-Drive + TPU capability) Q3 2026 on track. Creality is the first and best-funded consumer 3D printer company on the HK market.
Keep going
Turn the news into a workshop decision.
These are the durable guides and tools that help make sense of this news lane.