UV Printing News Digest - June 3, 2026
Published
eufyMake E1 Day 3 post-perk: $2,499 stable; Rotary Attachment ships June 10 — cylindrical UV printing for bottles and tumblers opens one week from today. xTool O1 Omni: July target unchanged; MSRP unpublished; 28–43 days; E1 $2,499 sets the single-head UV baseline the O1 Omni must justify above.
eufyMake E1 Day 3 Post-Perk — $2,499 US Basic Stable; Rotary Attachment Ships June 10 (One Week): Cylindrical UV Printing Opens for Bottles, Tumblers, and Curved Surfaces
The eufyMake E1 UV Printer enters Day 3 of its post-perk retail period (Wednesday June 3). The $2,499 US Basic Bundle price has held through 3 days of retail operation — no promotional adjustments in the first 72 hours confirms this as the stable post-launch retail floor. The most actionable forward-looking signal today: the Rotary Attachment for the E1 ships on June 10 — one week from today. The Rotary Attachment enables UV printing on cylindrical and curved objects: bottles, tumblers, cups, mugs, pens, cylinders, and other round surfaces. For buyers who purchased the E1 at the Kickstarter or early retail window and were waiting for cylindrical printing capability: June 10 is the shipping date for the Rotary Attachment. For buyers evaluating the E1 today: the Rotary Attachment is a confirmed accessory available in 7 days — factor it into your total purchase planning.
The June 10 Rotary Attachment shipping date is the single most actionable E1 update for buyers interested in cylindrical printing. Before June 10, the E1 is an A4 flatbed printer for hard non-porous flat or near-flat surfaces. After June 10, the E1 with Rotary Attachment extends to cylindrical objects — the product category (tumblers, water bottles, branded merchandise) that represents one of the highest-volume use cases for small UV printing businesses. For buyers evaluating the E1 as a business tool: the Rotary Attachment's June 10 availability changes the E1's revenue-generating use case spectrum from Day 1 of Rotary ownership.
Official product paths for readers acting on this update.
💡What this means for you
eufyMake E1 Day 3 post-perk (June 3, Wednesday): Pricing: $2,499 US Basic Bundle — STABLE through Day 3, no promotional adjustment in 72 hours of retail operation. Rotary Attachment shipping: June 10, 2026 — 7 days from today. Rotary Attachment function: enables UV printing on cylindrical and curved surfaces by rotating the object under the print head; compatible with bottles, tumblers, cups, mugs, pens, cylinders, and other round objects. Rotary Attachment ordering: available at eufymake.com (verify current price); ships from June 10. E1 flatbed specs (unchanged): CMYKWG + texture UV printing; 1440 DPI; A4 (210×297mm) print bed; 60mm max object height; 300+ hard non-porous surfaces (glass, ceramic, acrylic, metal, electronics, phone cases). Ongoing accessory/update roadmap: large-capacity ink supply system (Q3 2026 — reduces per-mL cost); priming trigger interval update (in testing — reduces ink waste from idle-to-print cycles). Kickstarter-backed orders: new Kickstarter orders placed starting June 20 shipping (separate from retail 1–3 business day window).
Market Position: Day 3 retail equilibrium at $2,499 with the Rotary Attachment shipping in 7 days represents the E1's most complete value proposition to date: flatbed A4 UV printing (available now) + cylindrical UV printing (available June 10) + large-capacity ink system (Q3 2026) as a single-machine UV printing workflow. For buyers evaluating the E1 as a business tool: the June 10 Rotary adds the tumbler/bottle market on Day 10 of ownership. This is the clearest E1 value articulation available at Day 3.
- Does the eufyMake Rotary Attachment ship to all markets simultaneously on June 10 — or is the shipping date US-first with international shipping dates to follow?
- What is the official price and maximum diameter/length specification for the Rotary Attachment — and does it support full-length tumbler printing (20 oz Yeti-style) in a single rotation pass without repositioning?
- Does eufyMake announce any June promotional bundle (E1 + Rotary Attachment combo discount) to coincide with the June 10 Rotary shipping date — reducing the total-cost-of-ownership for buyers who want both?
⏸️ Wait if: Your primary use case is cylindrical printing (tumblers, bottles, cups) and you are not yet an E1 owner — the Rotary Attachment ships June 10 (7 days); if you purchase the E1 today, the Rotary arrives within 7 days; if you want to confirm Rotary pricing and availability before purchasing the E1, wait until June 10 launch date
✅ Buy if: You want the E1 for flatbed UV printing NOW (glass, ceramic, acrylic, phone cases, metal) and plan to add the Rotary Attachment June 10 — $2,499 at eufymake.com, 1–3 business day shipping; Rotary ships June 10 to extend to cylindrical objects
xTool O1 Omni UV Printer Watch — Day 13 Since July–August Update: 28–43 Days to Launch Window; E1 at $2,499 Now the Established Single-Head UV Baseline; MSRP Still Unpublished
The xTool O1 Omni UV Printer watch enters Day 13 since xTool's May 21 official Reddit update (O1 Omni in final optimization, July–August 2026 launch, July as goal). With today being June 3, the July launch window is 28–43 days away (July 1 = 28 days; July 31 = 58 days; August 14 = 72 days). The O1 Omni MSRP, ink pricing, throughput specs, and maintenance costs remain unpublished. The market context has shifted since the May 21 update: the eufyMake E1 has transitioned to stable post-perk retail at $2,499 (Day 3), making $2,499 the established single-head desktop UV printer baseline that the O1 Omni must price relative to. The O1 Omni's A3+ (330×420mm) bed and dual-head architecture are expected to position it above the E1's A4 single-head configuration — but the specific pricing relationship remains the critical unknown.
The most important structural shift in the desktop UV market between May 21 and today: the E1's post-perk retail price ($2,499) is now a confirmed, stable data point rather than a launch-week number. The O1 Omni's A3+ bed is approximately 2.2× the E1's A4 print area — for buyers who need larger format output, the O1 Omni will justify a premium above $2,499. But the premium's size determines whether buyers who can afford $2,499 for the E1 will wait for the O1 Omni or purchase the E1 now. At 28–43 days to the July window, the O1 Omni buyer decision is entering its active phase.
Official product paths for readers acting on this update.
💡What this means for you
xTool O1 Omni watch status (June 3, Day 13 since May 21 update): Last manufacturer signal: xTool official Reddit post May 21, 2026 — O1 Omni in final optimization, July–August 2026 launch window, July still the goal. Days to July window: 28 days to July 1, 43 days to mid-July. Published O1 Omni specs: A3+ (330×420mm) print bed; dual print heads; CMYKWG UV printing; confirmed accessories: Large Flatbed, Small Flatbed, Roll-to-Roll Feeder, Laminator Attachment, Rotary Attachment. Unpublished (as of Day 13): MSRP; ink cartridge pricing; throughput specs (prints per hour); maintenance cycle specs; maximum object height. Market context change since May 21: eufyMake E1 is now at stable $2,499 post-perk retail (3 days of confirmed pricing) — this establishes the $2,499 single-head A4 UV baseline that the O1 Omni's A3+ dual-head architecture must price above. O1 Omni was also shown at FESPA (print industry trade show) — confirming commercial availability readiness.
Market Position: The O1 Omni watch at Day 13 is entering its most active buyer-decision phase: 28–43 days to the July window is the window where buyers who are actively shopping UV printers must decide whether to purchase the E1 now or wait for the O1 Omni. The decision framework: (1) E1 at $2,499 now + Rotary Attachment June 10 = full-capability UV printing available today; (2) O1 Omni at unknown MSRP in 28–43 days = A3+ format + dual heads + unknown ink economics. For buyers who need A3+ format or dual-head throughput: wait for O1 Omni. For buyers who need A4 flatbed UV printing capability now at a confirmed price: E1 at $2,499 is the answer.
- Does xTool publish the O1 Omni MSRP before the July launch window opens — giving buyers the 2–4 week evaluation period needed to compare E1 vs O1 Omni on price-per-output economics before purchase?
- Does xTool confirm an O1 Omni pre-order or early-access pricing structure — similar to the M2 early-bird ($549 vs $599 MSRP) — that incentivizes July purchase over waiting for August availability?
- Does the eufyMake Rotary Attachment's June 10 shipping date change the E1-vs-O1 Omni buyer calculation — with the Rotary adding cylindrical printing to the E1's capability set before the O1 Omni's July launch?
⏸️ Wait if: Your UV printing use case requires A3+ format (330×420mm — tabloid-size objects, phone case sheets, tile batches) or dual-head throughput — the O1 Omni is 28–43 days away in the July window; MSRP will be published before purchase
✅ Buy if: You need A4 UV flatbed printing capability now at a confirmed price — E1 at $2,499 at eufymake.com; Rotary Attachment ships June 10 for cylindrical printing; large-capacity ink system coming Q3 2026 to reduce per-mL cost; confirmed 1–3 business day shipping
Frequently Asked Questions
Does the eufyMake E1 Rotary Attachment work with standard 20 oz tumblers, or only specific sizes?▼
The eufyMake Rotary Attachment ships June 10, 2026 — full dimensional specifications (maximum diameter, maximum length, compatible object range) are not yet confirmed in manufacturer-published tech specs as of June 3. Based on the E1's 60mm max Z-axis height and A4 bed, the Rotary Attachment's compatible diameter range is constrained by these hardware limits. Before purchasing the Rotary Attachment for specific tumbler sizes (20 oz Yeti, 30 oz Stanley, skinny tumblers): verify the official maximum diameter specification at eufymake.com after June 10 when the full accessory spec sheet is published.
Should I buy the eufyMake E1 now or wait for the xTool O1 Omni?▼
The decision turns on your format requirement and timeline. If you need A4 UV printing now: E1 at $2,499 is available today with 1–3 day shipping, plus Rotary Attachment June 10 for cylindrical printing. If you need A3+ format (330×420mm — larger objects, multi-tile batches, phone case sheets): wait 28–43 days for the O1 Omni July window. The O1 Omni's MSRP is unpublished — you won't know the price premium over the E1 until xTool publishes it. For buyers for whom A4 is sufficient: E1 at $2,499 is a validated, available, in-stock product with no waiting.
What are the ongoing ink costs for the eufyMake E1 at $2,499?▼
The eufyMake E1 uses a CMYKWG cartridge system (Cyan, Magenta, Yellow, Black, White, Gloss) plus a cleaning cartridge. Per-mL ink cost with the current cartridge system is one of the primary long-term ownership economics concerns for production users — eufyMake has confirmed a large-capacity ink supply system for Q3 2026 (July–September) that will reduce per-mL cost. For the most current ink pricing and per-print cost analysis, see our eufyMake E1 review at thecraftycatsman.com/eufy-e1-uv-printer-review/ or check the UV Ink Cost Calculator at thecraftycatsman.com/tools/uv-ink-calculator/.