xTool O1 Omni Ink Prices vs eufyMake E1 — July 2026
xTool published O1 Omni ink prices on July 2. Here is the dated list-price comparison with eufyMake E1 ink, plus the costs neither brand's table can settle.
At the prices checked July 9, xTool's O1 Omni CMYK and white ink worked out to about $0.112 per ml, versus about $0.43 per ml for eufyMake E1 cartridges—a roughly 3.8× list-rate gap. That is useful for budgeting, but yield, cleaning waste, and printhead costs still determine the real cost per job.
Story briefxTool
xTool Publishes the O1 Omni Ink Table
xTool's official O1 page listed early-bird CMYK and white ink at $13.99 per 125 ml, or about $0.112 per ml, when checked July 9. Varnish was $15.99, fluorescent colors $19.99, and 290 ml white $23.99, or about $0.083 per ml. The page describes a closed ink system. These are dated list prices, not measured cost per print.
The table gives buyers a number to model, but not cleaning consumption, channel use by artwork, or printhead cost. Treat the per-ml figure as an input and add a waste allowance.
Affiliate disclosure: We may earn from qualifying purchases, at no extra cost to you.
Official and editorial links connected to this update.
Source notes
Published rates checked July 9: CMYK and white $13.99/125 ml; varnish $15.99/125 ml; fluorescent colors $19.99/125 ml; high-capacity white $23.99/290 ml. Real job cost remains unverified.
- How much ink does a typical production job use after cleaning and failed-print waste?
- What will O1 Omni printhead replacement cost?
Story briefeufyMake
eufyMake E1 Is the Higher Published Ink-Cost Reference
The eufyMake E1 store listed 100 ml ink cartridges at $42.99, or about $0.43 per ml, in our July 9 check. Its Basic bundle was listed at $2,499, Deluxe at $3,299, and Printer Only without ink at $2,199. The page showed E1 hardware in stock with a one-to-three-business-day estimate. These are dated store observations, so buyers should verify the current variant, included ink, and delivery estimate.
E1's higher list-rate ink may be acceptable when availability matters more than the lowest modeled cost. O1 looks cheaper per ml; E1 has a product already in use. Keep known prices separate from unmeasured lifetime cost.
Affiliate disclosure: We may earn from qualifying purchases, at no extra cost to you.
Official and editorial links connected to this update.
Know what changed before it changes your workshop.
Every morning, our news desk checks official product pages, release notes, launch terms, software updates, and credible maker reporting. When a change affects what to buy, update, test, or ignore, we send a short decision brief with the source, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal worksDon't stop at the headline
This story belongs to our UV printers, operating costs, materials, and real workshop fit. Pick the route that matches what you want to understand or do next.
Frequently Asked Questions
How much did xTool O1 Omni ink cost per ml?▼
The July 9 check put CMYK and white at about $0.112 per ml and 290 ml white at about $0.083 per ml. Those were published promotional rates, not measured cost per print.
Was O1 Omni ink cheaper than eufyMake E1 ink?▼
On the dated list prices, yes: about $0.112 per ml for O1 CMYK and white versus about $0.43 per ml for E1 cartridges. Yield, maintenance, cleaning waste, and printhead cost can change the real comparison.
Does the xTool deposit guarantee an ink price?▼
The official page confirmed a refundable deposit and a promotional gift bundle. We did not find wording that clearly guaranteed a permanent ink-price lock, so verify the current checkout terms directly with xTool.