UV Printing News Digest - July 6, 2026
eufyMake Prime Day closes tomorrow (July 7): E1 Basic $2,249, Deluxe $3,099. xTool O1 Omni July 15 checkout opens in 9 days — early-bird from $1,699, ink at ~$0.112/ml confirmed. Final decision window for both machines is this week.
eufyMake Prime Day closes tomorrow (July 7): E1 Basic $2,249, Deluxe $3,099, 10% off accessories. xTool O1 Omni July 15 checkout opens in 9 days — early-bird from $1,699 UV Edition, ink at ~$0.112/ml published. If you need UV printing before August, tomorrow is your last confirmed E1 discount window. Model both with the UV Ink Cost Calculator before deciding. Checked July 6, 2026.
Story briefxTool / xtool.com
xTool O1 Omni: 9 Days to July 15 Checkout — What's Confirmed, What's Still Open
Checked July 6, 2026. xTool O1 Omni final checkout and global launch is scheduled for July 15, 2026 — 9 days out. Confirmed facts per xTool's official product page: UV Edition $1,699 early-bird ($2,499 MSRP); Dual-Head UV Edition $2,699 ($3,299 MSRP); UV + DT Fabric Edition $2,799 ($3,499 MSRP). Epson F1080 printheads. Ink pricing confirmed July 2: CMYK/White $13.99/125ml early-bird (~$0.112/ml); 290ml white $23.99 (~$0.083/ml); closed system. $50 refundable deposit locks in early-bird pricing and a $459 gift bundle (BatchFlow Jig, three 20% ink coupons, 3,000 Atomm credits). Shipping starts as early as August 2026 — a target, not a commitment. Still open: per-print ink yield, printhead replacement cost, accessory pricing, cleaning waste economics. Verify all details at xtool.com before checkout.
The July 15 checkout is 9 days out. The facts xTool has published — editions, machine pricing, ink table — are sufficient to model COGS with the UV Ink Cost Calculator if you know your volume and use-case lane. What remains genuinely open is per-print yield and printhead replacement cost — the two numbers that determine whether the $0.112/ml early-bird ink rate holds in production. Buyers who need those answers before committing still have the $50 refundable deposit as a hedge.
Official and editorial links connected to this update.
Bench notes
xTool O1 Omni confirmed facts (July 6, 2026 — xtool.com): Editions: UV $1,699 early-bird/$2,499 MSRP; Dual-Head UV $2,699/$3,299; UV+DT Fabric $2,799/$3,499. Heads: Epson F1080 (1 on UV, 2 on Dual-Head and Fabric). Bed: 330×122mm standard, 330×420mm large A3+. Resolution: 720×1440 dpi. Alignment: ±0.2mm. Texture: up to 7mm. Smart Cycle 2.0 (14-day idle). Ink (early-bird): CMYK/White $13.99/125ml (~$0.112/ml); 290ml white $23.99 (~$0.083/ml); MSRP $19.99/125ml (~$0.16/ml). Closed ink system. Still open: per-print yield, printhead replacement cost, accessory pricing.
Market Position: At $1,699 early-bird UV Edition with ink at $0.112/ml, xTool's O1 Omni is positioned at a lower machine cost and significantly lower ink cost than the eufyMake E1 ($2,249 Prime Day / $0.43/ml ink). The closed ink system trades future pricing control for the lowest published per-ml rate in the desktop UV category. The $50 refundable deposit preserves optionality through July 15. Watch line: per-print yield and printhead replacement price — the two facts that convert the ink table into an actual COGS model.
- What is the actual per-print ink yield for each channel on the O1 Omni — the number that converts $0.112/ml into a per-job cost?
- What does Epson F1080 printhead replacement cost on the O1 Omni — xTool has not published this figure as of July 6?
- Are early-bird ink prices locked at deposit, or finalized at July 15 checkout?
Wait if: You need per-print yield and printhead replacement cost before committing — these are still open as of July 6; the $50 deposit is refundable through July 15 if remaining data proves unfavorable
Buy if: You have modeled your use case using published per-ml ink rates in the UV Ink Cost Calculator and the economics hold for your volume — place the $50 refundable deposit by July 15 to lock in early-bird pricing and the $459 gift bundle
Story briefeufyMake / eufymake.com
eufyMake E1 Prime Day Closes Tomorrow (July 7) — Basic $2,249, Deluxe $3,099: Last Confirmed Discount Window
Checked July 6, 2026. eufyMake's Prime Day extension closes tomorrow, July 7, 2026. Current promotional prices on the official eufyMake store: Basic bundle $2,249 ($50 off the $2,299 regular street price; list $2,499); Deluxe bundle $3,099 ($200 off the $3,299 list). Accessories and materials 10% off through July 7. $100 off eufyMake Care. E1 ink: $42.99/100ml (~$0.43/ml). E1 is in stock with 1–3 business day shipping. The sale closes eight days before xTool O1 Omni's July 15 final checkout. No confirmed follow-on promotion announced after July 7. Verify current pricing at eufymake.com before tomorrow's deadline.
Tomorrow closes the only confirmed E1 discount window before the O1 Omni's July 15 checkout. The buy-now case for E1 is in-hand certainty: UV printing on your bench in under a week, with a published consumable model and an owned proof-bench baseline. The wait-for-O1 case rests on lower machine cost ($1,699 vs $2,249), substantially lower ink economics ($0.112/ml vs $0.43/ml), and a published spec set — at the cost of August shipping and still-open yield data.
Official and editorial links connected to this update.
Bench notes
eufyMake E1 Prime Day (closing July 7, 2026 — verified July 6, eufymake.com): Basic bundle $2,249 (promotional; street $2,299, list $2,499). Deluxe bundle $3,099 ($200 off $3,299 list). Accessories/materials 10% off. Care $100 off. E1 specs: 330×420mm bed; 5mm max texture; in stock 1–3 business day shipping. Ink: $42.99/100ml (~$0.43/ml). Replacement printhead: ~$599. eufyMake Care pricing: confirmed available. No confirmed promotional period after July 7 announced as of July 6, 2026.
Market Position: The E1 at $2,249 Basic is still $550 above the O1 Omni UV Edition's $1,699 early-bird, and its ink runs 3.8× higher per ml than xTool's early-bird rate. The E1 advantage is singular and concrete: it ships in under a week. For buyers who cannot wait until August, tomorrow's close is the decision point. For buyers who can model and wait, the O1 Omni's July 15 checkout is the cleaner economics play — use the UV Ink Cost Calculator to quantify the difference before tomorrow.
- Will eufyMake run a follow-on promotion timed to compete with the O1 Omni July 15 launch — no announcement confirmed as of July 6?
- Does the Prime Day 10% accessory discount apply to the Rotary ($399.99), UV DTF Laminating Machine ($399.99), and Roll-to-Film Attachment ($499.99 pre-order)?
- Is the $2,249 Basic price available at Amazon or Best Buy during the July 7 close, or only on eufymake.com?
Wait if: You can wait until after July 15 — O1 Omni UV Edition at $1,699 early-bird is $550 below E1 even at Prime Day pricing, with ink at ~$0.112/ml vs ~$0.43/ml; model both in the UV Ink Cost Calculator before the O1 deposit deadline
Buy if: You need UV printing on your bench before August and cannot wait — E1 Basic at $2,249 through tomorrow (July 7) ships in 1–3 days with a published consumable model and proof-bench baseline; verify pricing at eufymake.com before the July 7 close
Frequently Asked Questions
Is today the last day of the eufyMake E1 Prime Day sale?▼
No — the last day is tomorrow, July 7, 2026. eufyMake's Prime Day extension runs through July 7 on the official eufyMake store. Basic bundle is $2,249 ($50 off $2,299 regular price; list $2,499). Deluxe is $3,099 ($200 off $3,299 list). Accessories are 10% off. E1 is in stock with 1–3 business day shipping. Verify current pricing at eufymake.com before the July 7 close. Checked July 6, 2026.
Should I buy the eufyMake E1 now or wait 9 days for the xTool O1 Omni checkout?▼
Key facts as of July 6: O1 Omni UV Edition $1,699 early-bird, ink ~$0.112/ml, August shipping, July 15 final checkout. E1 Basic $2,249 through tomorrow (July 7), ink ~$0.43/ml, in stock now. O1 Omni wins on machine price ($550 lower) and ink economics (3.8:1 per-ml ratio); E1 wins if you need UV printing before August. Model both using the <a href='/tools/uv-ink-calculator/'>UV Ink Cost Calculator</a> with published per-ml rates, and see the full <a href='/xtool-uv-printer-vs-eufymake-e1-comparison/'>O1 Omni vs E1 comparison</a> before tomorrow's E1 deadline. Checked July 6, 2026.
What is still unknown about the xTool O1 Omni 9 days before checkout?▼
As of July 6, 2026, the published open questions on xTool's O1 Omni are: real per-print ink yield per channel (the number that converts $0.112/ml into per-job cost); Epson F1080 printhead replacement price on the O1 (not published by xTool); exact accessory pricing for the Roll Feeder, Laminator, and BatchFlow Jig beyond deposit-bundle terms; and real-world throughput in production-scale jobs. The $50 deposit is fully refundable through July 15 if those answers matter to your buying decision. Verify at xtool.com. Checked July 6, 2026.
What does the xTool O1 Omni deposit bonus include?▼
xTool's $50 refundable deposit (opened June 29, closes July 15, 2026) secures your early-bird edition price and unlocks a $459 bonus bundle: BatchFlow Jig, three 20% off ink coupons, and 3,000 Atomm credits for the One-Click AI Generator. The $50 is deducted from the final machine price at July 15 checkout. Verify current bonus terms at xtool.com before the deposit window closes. Checked July 6, 2026.