xTool O1 Omni Final Payment Runs July 15–August 15
Checked July 15: Final payment for the xTool O1 Omni opens at 5:30 p.m. PDT / 8:30 p.m. EDT and runs through August 15. P2 and P2S support is now confirmed.
Checked July 15: The xTool O1 Omni deposit phase has closed. xTool says final payment opens 30 minutes before its 6 p.m. PDT livestream on July 15 and runs through August 15. Eight U.S. bundles range from $1,699 to $3,969; the updated FAQ also lists P2 and P2S for Laser Meets Printer.
Story briefxTool
xTool O1 Omni deposit phase closes; final payment opens July 15 and runs through August 15
Checked July 15, 2026. The xTool O1 Omni deposit phase closed at midnight PDT July 15. xTool says final payment opens at 5:30 p.m. PDT / 8:30 p.m. EDT on July 15, 30 minutes before its scheduled livestream, and runs through August 15, closing at 11:59:59 p.m. local time. Qualifying deposit holders choose any available edition at final payment; purchased editions cannot be upgraded or converted afterward. Eight U.S. launch bundles run from $1,699 (Single UV Standalone) to $3,969 (DT + UV Versatile Bundle). A July 14 FAQ update lists P2 and P2S alongside P3, S1, M2, and M1 Ultra for Laser Meets Printer; F Series models are planned. The scheduled July 15 6 p.m. PDT / 9 p.m. EDT xTool event offers a chance to win $500 O1 Machine Vouchers. Verified on the official xTool O1 Omni page.
P2 and P2S confirmation closes the most-asked-about gap from the July 13 digest and gives existing xTool laser owners a direct manufacturer answer before the August 15 deadline. Based on dated U.S. bottle prices, O1 ink at about $0.112/ml is approximately 63% below eufyMake E1 ink at about $0.30/ml; that is not a per-job or ownership-cost comparison because yield, channel mix, cleaning draw, waste, and package parity remain unmeasured. The xTool-supplied O1 test unit has not yet arrived; independent measurements remain pending.
Affiliate disclosure: We may earn from qualifying purchases, at no extra cost to you.
Official and editorial links connected to this update.
Before final payment
Eight U.S. launch bundles: Single UV Standalone $1,699; Single UV Rotary Bundle $2,059; Dual UV Standalone $2,699; Dual UV Rotary Bundle $3,059; Dual UV Versatile Bundle $3,869; DT + UV Standalone $2,799; DT + UV Rotary Bundle $3,159; DT + UV Versatile Bundle $3,969. Epson F1080 printheads: 1 on Single UV, 2 on Dual UV and DT + UV. Replacement printhead: $399; xTool states a three-month core-printhead component warranty, while labor, service, installed cost, actual life, and edition consequences remain open. Machine warranty: 1 year US/Canada, 2 years Europe/UK. UV ink: $13.99/125ml (~$0.112/ml at launch). Final payment opens July 15 at 5:30 p.m. PDT / 8:30 p.m. EDT and closes August 15 at 11:59:59 p.m. local time. Laser Meets Printer confirmed: P3, P2, P2S, S1, M2, M1 Ultra; F Series planned.
Market position: Using dated U.S. bottle prices, O1 Omni UV ink at about $0.112/ml is approximately 63% below eufyMake E1 ink at about $0.30/ml (effective July 13, 2026). That is not per-job or ownership-cost proof: substrate, channel usage, coverage, cleaning draw, waste, and package parity can change real cost. Single UV Standalone at $1,699 is listed below the eufyMake E1 Basic at $2,499. The not-yet-received, xTool-supplied O1 test unit will support a measured comparison against the owned eufyMake E1.
- What are real-world per-job ink yield figures on production units across channels and substrate types?
- When will xTool link a verifiable GREENGUARD Gold certificate with a certificate number?
- What is the timeline for F Series Laser Meets Printer support?
Wait if: You want independent yield, throughput, and durability data from production units before the August 15 deadline
For qualifying deposit holders, consider completing payment only if: You hold a qualifying deposit, your edition choice is settled, you have read the current FAQ and checkout terms, and you can complete payment before August 15
Know what changed before it changes your workshop.
Every morning, our news desk checks official product pages, release notes, launch terms, software updates, and credible maker reporting. When a change affects what to buy, update, test, or ignore, we send a short decision brief with the source, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal worksDon't stop at the headline
This story belongs to our UV printers, operating costs, materials, and real workshop fit. Pick the route that matches what you want to understand or do next.
Frequently Asked Questions
When does the xTool O1 Omni final-payment window close?▼
xTool says final payment opens July 15 at 5:30 p.m. PDT / 8:30 p.m. EDT and runs through August 15, 2026, closing at 11:59:59 p.m. local time. The $50 deposit phase closed at midnight PDT July 15 and no longer accepts new entries. Qualifying deposit holders may choose any available edition at final payment, but purchased editions cannot be upgraded or converted afterward. Verify current terms on the official xTool O1 Omni page.
Which xTool laser cutters are confirmed for Laser Meets Printer with the O1 Omni?▼
As of the July 14 FAQ update, xTool confirms Laser Meets Printer support for P3, P2, P2S, S1, M2, and M1 Ultra. F Series support is planned. The July 13 digest listed P3 only — P2 and P2S were added in the July 14 update. If you own a model not on the confirmed list, check the current xTool FAQ before factoring Laser Meets Printer into your purchase decision.
How does xTool O1 Omni ink cost compare to the eufyMake E1?▼
At current list prices: O1 Omni UV ink is $13.99/125ml (~$0.112/ml at launch). eufyMake E1 ink is $29.99/100ml (~$0.30/ml, effective July 13). The O1 ink is approximately 63% lower per ml. Real-world per-job cost depends on substrate, channel usage, coverage, and waste — independent yield figures from production units are not yet available.