xTool Studio Mobile 1.3.1 Adds O1 Omni Support
xTool Studio Mobile 1.3.1 adds O1 Omni management, monitoring, maintenance, and Smart Mask support when the printer runs firmware 40.101.010.12 or later.
xTool’s August 28 release notes say Studio Mobile 1.3.1 adds O1 Omni Printer support when the machine is running firmware 40.101.010.12 or later. The app can manage the device, monitor jobs, expose routine-maintenance functions, and use Smart Mask to create print-ready masks. Confirm that both the mobile app update and required device firmware are available in your region before relying on the workflow.
App version, device firmware, and workflow support must line up
The official notes were updated August 28, 2026 and place O1 support under version 1.3.1.
An app update alone does not establish compatibility if the connected printer is below the listed firmware level.
The release page establishes the compatibility target, not that every phone and O1 already exposes both updates.
ReportxTool Support
O1 mobile control now has an official version and firmware boundary
xTool’s Studio Mobile 1.3.1 notes add O1 Omni Printer support. The listed functions are device management, job monitoring, routine maintenance, and Smart Mask, which can detect material outlines and create print-ready masks. xTool requires O1 firmware 40.101.010.12 or later.
The useful change is not simply that a mobile app exists. O1 owners now have an exact compatibility pair to verify. Check the app version and printer firmware before changing an active workflow, and keep the existing control path available until the update is visible and stable on your own device. An app update alone does not establish compatibility if the connected printer is below the listed firmware level. The release page establishes the compatibility target, not that every phone and O1 already exposes both updates. This report does not establish print quality, mask accuracy, connection reliability, maintenance effectiveness, or app-store rollout timing. The Crafty Catsman has not installed version 1.3.1, updated an O1, monitored a job, used Smart Mask, or tested the maintenance workflow.
Treat compatibility as a two-version check
The official notes name Studio Mobile 1.3.1 and require O1 firmware 40.101.010.12 or later. They describe device management, job monitoring, routine maintenance, and Smart Mask. Smart Mask is described as detecting a material outline through subject detection or segmentation and producing a print-ready mask.
The practical gain is a mobile owner workflow: This release expands how an O1 can be managed; it does not change the printer’s documented hardware, bundle pricing, shipping status, or independently verified output quality. Those decisions remain with the current O1 owner page and direct product sources.
- When will version 1.3.1 appear in every supported regional app store?
- How reliably does Smart Mask handle reflective, transparent, or irregular substrates?
- Which maintenance actions are available on each O1 configuration?
Wait if the version pair is incomplete:Your app store does not show 1.3.1 or the O1 is below firmware 40.101.010.12.
Continue with a controlled update:Both required versions are available and you can keep the current workflow available while checking the new mobile path.
Studio Mobile 1.3.1 — official O1 compatibility record
| Software field | xTool Studio Mobile 1.3.1 |
|---|---|
| Supported O1 firmware | 40.101.010.12 or later |
| Named O1 functions | Management, monitoring, routine maintenance, Smart Mask |
| Regional rollout date | Not established for every app store and device |
| Independent workflow evidence | Not established here |
Sources: Official release notes
Confirm both versions before moving an active O1 workflow to mobile
Confirm Studio Mobile 1.3.1 and O1 firmware 40.101.010.12 or later, then follow xTool’s update path for the exact device.
Keep the working control path in place until the app and printer firmware both expose the supported versions for your region.
Studio Mobile 1.3.1 adds O1 Omni support
xTool lists device management, job monitoring, routine maintenance, and Smart Mask behind the stated O1 firmware prerequisite.
Primary pages and records used for this report.
Frequently Asked Questions
Which xTool Studio Mobile version adds O1 Omni support?▼
xTool’s official release notes name Studio Mobile 1.3.1 as the O1-support release.
Which O1 firmware does Studio Mobile require?▼
The release notes require O1 firmware 40.101.010.12 or later. Confirm the exact version on the printer before relying on mobile control.
What can Studio Mobile 1.3.1 do with the O1?▼
xTool lists device management, job monitoring, routine maintenance, and Smart Mask. Those are manufacturer-described functions; this report is not a hands-on test.
Have a launch, correction, or test opportunity?
Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.
Choose the useful next step.
Verify the software prerequisite, then continue into the current O1 guide or the desktop UV comparison before changing a working production setup.
Get the next useful O1 update.
When a source-backed change affects what to buy, update, test, or ignore, we send a short decision brief with the evidence, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal works