ELEGOO H1 HT Filament Dryer Launches at $70 — 85°C Max, 11 Presets, Dual Active Vents
ELEGOO launched the H1 HT Filament Dryer at $70 on July 24 with 85°C max temperature, 11 material presets including PAHT-CF and PVA, and dual active dehumidification vents.
Checked July 28, 2026: ELEGOO launched H1 HT Filament Dryer on July 24 at $70. Max drying temperature is 85°C with 11 preset filament modes including PAHT-CF and PVA plus Custom. A 3.5-inch touchscreen shows live temperature and relative humidity; dual active vents seal when drying ends; a dedicated TPU bypass outlet is included.
ReportELEGOO
ELEGOO launches H1 HT Filament Dryer at $70 with 85°C max and 11-preset touchscreen
ELEGOO launched the H1 HT Filament Dryer on July 24, 2026, priced at $70 USD. The dryer reaches a maximum drying temperature of 85°C and includes 11 preset filament modes covering PLA, PETG, TPU, ABS, ASA, PET, PP, PC, PA, PAHT-CF, and PVA, plus a Custom setting. A 3.5-inch color touchscreen displays live temperature and relative humidity. The spool platform rotates automatically during drying for uniform heat exposure. Dual active dehumidification vents release humid air during operation and seal when drying ends. A dedicated TPU bypass outlet supports flexible and fiber-reinforced materials. The shell is described as flame resistant with overheat protection included. The unit holds a single standard spool. Source: ELEGOO official product announcement.
The 85°C ceiling is the operative figure here. Most common filament dryers cap at 55–70°C, which is adequate for PLA and PETG but insufficient for PC, PA, and PAHT-CF in practice. An 85°C rating means the H1 HT is listed as compatible with the full preset range at its stated temperatures — though manufacturers' stated temperatures and independently measured chamber temperatures can differ. The $70 price and 11-preset range position this as a direct candidate for multi-material workshops printing engineering-grade materials. This is a source-checked launch brief; hands-on yield, temperature accuracy, and long-run reliability require independent review.
Workshop decision
ELEGOO lists 11 preset filament profiles: PLA, PETG, TPU, ABS, ASA, PET, PP, PC, PA, PAHT-CF, and PVA. Max temperature is 85°C. The 3.5-inch touchscreen reports real-time temperature and relative humidity. Auto-rotating spool platform ensures consistent heat distribution across the full spool. Dual active dehumidification vents open during drying and seal on completion to prevent re-absorption. The TPU bypass outlet provides a filament path designed for flexible and fiber-reinforced filaments printing direct from the dryer. The shell uses flame-resistant materials; overheat protection is listed as a feature.
Who the 85°C ceiling matters to: Standard sub-$70 filament dryers typically cap at 55–70°C, which covers PLA, PETG, and most flexible filaments but leaves PA, PC, and CF-reinforced materials underserved. The H1 HT's 85°C ceiling and explicit PAHT-CF and PA presets address that gap at the same price tier. Whether the chamber holds 85°C accurately and consistently under load requires independent measurement.
- What is the measured chamber temperature versus the displayed setpoint at each preset?
- How long does the H1 HT take to reach 85°C and sustain it across a standard 1 kg spool?
- Does the TPU bypass outlet maintain a consistent feed path under tension during multi-hour prints?
Wait if:You need independently measured temperature accuracy, drying time benchmarks, or long-run reliability data before committing
Consider now if:You regularly print PA, PAHT-CF, PC, or other engineering-grade filaments and need a dryer rated above 70°C at the $70 price point — confirm availability and current price at the official ELEGOO page before ordering
Verified specifications
| Spec | ELEGOO H1 HT Filament Dryer |
|---|---|
| Launch date | July 24, 2026 |
| US price | $70 |
| Max drying temperature | 85°C |
| Preset filament modes | 11 (PLA, PETG, TPU, ABS, ASA, PET, PP, PC, PA, PAHT-CF, PVA) + Custom |
| Display | 3.5-inch color touchscreen (temperature + %RH readout) |
| Spool platform | Auto-rotating during drying |
| Venting | Dual active dehumidification vents; auto-seal on completion |
| Filament outlet | Dedicated TPU bypass outlet for flexible and fiber-reinforced materials |
| Shell material | Flame-resistant; overheat protection included |
| Capacity | Single standard spool |
| Independent testing | Not performed by this site at this check |
Sources: ELEGOO official specs
Primary pages and records used for this report.
Frequently Asked Questions
What filaments does the ELEGOO H1 HT support?▼
ELEGOO lists 11 built-in presets: PLA, PETG, TPU, ABS, ASA, PET, PP, PC, PA, PAHT-CF, and PVA. A Custom mode lets users set their own temperature and time. The preset range covers standard, flexible, and engineering-grade materials at the listed temperatures — independent measurement of actual chamber temperatures at each preset has not been performed by this site.
What is the maximum drying temperature of the ELEGOO H1 HT?▼
ELEGOO lists 85°C as the maximum drying temperature. Most consumer filament dryers cap at 55–70°C, so the H1 HT's ceiling is notable for PA, PC, and PAHT-CF workflows that require higher heat. Whether the chamber holds 85°C accurately under full-spool load requires independent measurement.
How much does the ELEGOO H1 HT Filament Dryer cost?▼
ELEGOO launched the H1 HT at $70 USD on July 24, 2026. Prices in other regions at launch were €70 EUR, £62 GBP, $90 CAD, $149 AUD, and ¥10,399 JPY. Verify current price and availability at the official ELEGOO US product page before ordering.
Can I print directly from the ELEGOO H1 HT while it is drying?▼
ELEGOO includes a dedicated TPU bypass outlet designed for feeding filament directly to a printer during drying. The outlet is intended for flexible and fiber-reinforced materials. Whether the outlet maintains consistent feed tension under extended print runs requires hands-on testing.
Have a launch, correction, or test opportunity?
Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.
Choose the useful next step.
Know what changed before it changes your workshop.
Every morning, our news desk checks official product pages, release notes, launch terms, software updates, and credible maker reporting. When a change affects what to buy, update, test, or ignore, we send a short decision brief with the source, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal works