Skip to main content
3D PrintingBriefing

Snapmaker 2.0, J1/J1s and Ray: End of Life, Support Dates

Short answer

Snapmaker announced end of life for the 2.0, J1/J1s and Ray lines on October 29, 2026, with no new features or add-ons planned. Software maintenance runs to October 29, 2028; firmware critical fixes and security patches to October 29, 2029. Parts and repairs depend on availability, with no separate end date. New purchases do not restart those deadlines.

By The Crafty CatsmanPublished
What Snapmaker announced

Fixed end dates for software and firmware, undated parts and repairs, and no new add-ons

SoftwareBug fixes and compatibility maintenance until October 29, 2028

Snapmaker says maintenance now focuses on stability, security and compatibility, with no new features or add-ons for the three lines.

FirmwareCritical fixes and security patches until October 29, 2029

Snapmaker lists GitHub firmware repositories for the J1/J1s, the Snapmaker 2.0 controller and modules, and the Ray.

Parts and repairsDuring the support period, subject to parts availability

Snapmaker gives no separate end date for spare parts, repair service and technical support, and says parts availability varies by region.

1

ReportSnapmaker

What support remains for owners

On October 29, 2026, Snapmaker announced that three product lines have reached end of life: the Snapmaker 2.0 series (A150, A250/A250T/F250 and A350/A350T/F350, with its single and dual extrusion 3D printing modules, 1600 mW, 10 W, 20 W and 40 W laser modules, standard and 200 W CNC modules, Quick Swap Kit and Bracing Kit), the J1 and J1s IDEX 3D printers, and the Ray series (Ray 20W and 40W, machine body and enclosure, with 2W, 20W and 40W laser modules). Snapmaker defines end of life as no longer manufactured or actively sold through its official channels and says it is not the end of support: software bug fixes and compatibility maintenance continue until October 29, 2028, firmware critical fixes and security patches until October 29, 2029, and spare parts, repair service and technical support during the support period, subject to parts availability. Snapmaker gives no separate end date for parts and repairs. No new features or add-ons will be released, the support dates do not restart with a new purchase, and products not on the list are not affected.

Why it matters

Snapmaker’s own wording on remaining stock is inconsistent: its post says remaining inventory will continue to be available through selected Snapmaker official stores and authorized resellers while supplies last, and its FAQ’s definition of end of life says it may still be, while the FAQ’s answer on buying says EOL products are no longer available through Snapmaker’s official online store. Snapmaker’s stores bear out both halves: when we checked on November 5, its US, EU and global web stores listed only the U1 and the Artisan as machines, with no Snapmaker 2.0, J1/J1s or Ray machine, and its J1s page says the printer “has been discontinued”. The same stores still listed end-of-life 2.0 modules and kits as available: the 3D printing and dual extrusion modules, the 10 W and 40 W laser modules (the 40 W also in a Snapmaker Ray version), the 50 W and 200 W CNC modules, the Quick Swap Kit and the Bracing Kit, with some items sold out in particular regions of the global store. The Ray enclosure showed as sold out in the US store but available in the EU and global stores. For owners that matters more than the machines: Snapmaker recommends buying replacement parts you anticipate needing without delay, and its US store still listed some 2.0 modules when we checked. The Crafty Catsman has never owned or tested a Snapmaker 2.0, J1/J1s or Ray; this report relies on Snapmaker’s own documents and store listings.

What end of life covers, and what Snapmaker leaves open+

Snapmaker’s End-of-Life FAQ, which its wiki shows was updated on October 29, lists the affected products: the Snapmaker 2.0 A150, A250/A250T/F250 and A350/A350T/F350 with single and dual extrusion 3D printing modules, 1600 mW, 10 W, 20 W and 40 W laser modules, standard and 200 W CNC modules, the Quick Swap Kit and the Bracing Kit; the J1 and J1s; and the Ray 20W and 40W, Ray machine body and Ray enclosure with 2W, 20W and 40W laser modules. October 29 is the first public date for these terms that we can find. Firmware now brings critical fixes and security patches only, with no new features, and Snapmaker lists GitHub firmware repositories for the J1/J1s, the Snapmaker 2.0 controller and modules, and the Ray. Snapmaker says Luban stays maintained during the support period, but “compatibility with future third-party slicer versions cannot be guaranteed”; its FAQ promises “reasonable efforts to maintain compatibility with future releases of supported slicing software” and says “stable legacy software versions will remain available for existing users”. The warranty stays valid under the policy in effect at purchase, including new units bought from authorized resellers. Spare parts are requested through a quotation form linked from the FAQ, and where a part is gone, Snapmaker says it will try compatible replacements, repair options or upgrade suggestions. The post says manuals, firmware, software downloads and support documentation will remain publicly accessible indefinitely, though another passage ties them to the support period.

Budget parts now if you depend on a module; a leftover machine buys a shorter window: In Snapmaker’s US store on November 5, the 2.0 3D printing module was $149, the dual extrusion module $259, the 10 W laser module $149, the 40 W laser module $429, the 50 W CNC module $79, the 200 W CNC module bundle from $159, the Quick Swap Kit $149 and the Bracing Kit $84. There is no trade-in program yet: Snapmaker says it is evaluating trade-in and upgrade programs. Its recommended replacements are the Artisan or Artisan Premium for 3-in-1 work and the U1 for multicolor printing. A leftover machine bought now gets the same end dates as one bought years ago, because the support timeline belongs to the product line, not the purchase. Snapmaker’s list of resellers that may still hold end-of-life stock covers Canada, India, Saudi Arabia, Turkey and Europe and names no U.S. seller.

What remains open:
  • When the support period for spare parts, repair service and technical support ends; Snapmaker gives no separate end date.
  • How long specific spare parts and modules will last in each region; Snapmaker gives no quantities.
  • Whether official marketplace or regional storefronts still hold machines, and how long module stock lasts.
  • Which third-party slicer versions will lose compatibility, and when.
  • Whether the trade-in or upgrade program Snapmaker says it is evaluating will happen, and on what terms.

Think twice if:You are weighing a leftover 2.0, J1/J1s or Ray and need firmware support past October 29, 2029, new add-ons, or guaranteed compatibility with future third-party slicer versions.

Act now if:You own a Snapmaker 2.0, J1/J1s or Ray and depend on a module or part that wears: Snapmaker recommends buying replacement parts you anticipate needing without delay, and its US store still listed several 2.0 modules on November 5.

Snapmaker’s end-of-life terms for the 2.0, J1/J1s and Ray

TermSnapmaker 2.0 series, J1/J1s and Ray series
End of life announcedOctober 29, 2026
Software bug fixes and compatibility maintenanceUntil October 29, 2028
Firmware critical fixes and security patchesUntil October 29, 2029
Spare parts, repair service and technical supportDuring the support period, subject to parts availability
End date for parts and repairsNot given by Snapmaker
New features or add-onsNone
Support dates on a new purchaseDo not restart
WarrantyPolicy in effect at purchase, including new units from authorized resellers
Trade-in programNone yet; Snapmaker says it is evaluating one
Machines in Snapmaker’s US, EU and global stores (Nov 5)U1 and Artisan only
Snapmaker US store, 2.0 modules (Nov 5)3D printing $149; dual extrusion $259; 10 W laser $149; 40 W laser $429; 50 W CNC $79; 200 W CNC bundle from $159
Snapmaker US store, kits (Nov 5)Quick Swap Kit $149; Bracing Kit $84; Ray enclosure sold out
Resellers Snapmaker lists for remaining stockCanada, India, Saudi Arabia, Turkey, Europe; no U.S. seller

Sources: Snapmaker official specs

Your next step

Plan parts and any replacement against Snapmaker’s published dates.

Own a 2.0, J1/J1s or Ray?

Nothing changes in how it works. Snapmaker recommends buying replacement parts you anticipate needing without delay, and on November 5 its US store still listed several 2.0 modules and kits as available.

Considering a leftover unit?

The support dates do not restart with a new purchase, no new add-ons are coming, and Snapmaker’s list of resellers that may still hold end-of-life stock names no U.S. seller; confirm stock and warranty with the reseller first.

Current record
  1. Snapmaker announces end of life for the 2.0, J1/J1s and Ray

    Snapmaker’s post “So Long, and Thanks for All the Makes” and its End-of-Life FAQ, updated the same day, say the three lines are no longer manufactured and set software bug fixes and compatibility maintenance until October 29, 2028 and firmware critical fixes and security patches until October 29, 2029.

  2. Snapmaker’s stores list modules but no end-of-life machines

    On November 5, Snapmaker’s US, EU and global web stores listed only the U1 and the Artisan as machines, but still listed 2.0 modules, the Quick Swap Kit and the Bracing Kit as available; the Ray enclosure showed as sold out in the US store.

Official sources

Primary pages and records used for this report.

Official announcementRead Snapmaker’s end-of-life postOfficial source for the October 29 end-of-life announcement, the product lines, the support dates, the parts advice and the reseller note. Not an affiliate link.Official FAQRead Snapmaker’s End-of-Life FAQUpdated October 29: the full product and module list, the support lifecycle, spare-parts requests, slicer compatibility, the trade-in answer and the reseller list. Not an affiliate link.Official blogSee Snapmaker’s blogLists the end-of-life post under October 29, 2026. Not an affiliate link.Official product pageSee Snapmaker’s J1s pageOn November 5 it said “Snapmaker J1s has been discontinued” and linked to the FAQ, with no way to buy. Not an affiliate link.Official storeSee Snapmaker’s US store catalogOn November 5 it listed the U1 and Artisan as its only machines, still listed 2.0 modules, the Quick Swap Kit and the Bracing Kit as available, and showed the Ray enclosure as sold out. The US prices in this report are what it showed that day. Not an affiliate link.Official storeSee Snapmaker’s EU store catalogOn November 5 it listed the U1 and Artisan as its only machines and still listed 2.0 modules, both kits and the Ray enclosure as available. Not an affiliate link.Official storeSee Snapmaker’s global store catalogOn November 5 it listed the U1 and Artisan as its only machines and still listed 2.0 modules, both kits and the Ray enclosure, with some items sold out in particular regions. Not an affiliate link.

Frequently Asked Questions

Will my Snapmaker 2.0, J1 or Ray stop working?▼

No. Snapmaker says end of life does not change how the machines work. It will fix software bugs and compatibility issues until October 29, 2028, ship firmware critical fixes and security patches until October 29, 2029, and offer spare parts, repairs and technical support during the support period, subject to parts availability (Snapmaker gives no separate end date). Snapmaker recommends buying replacement parts you anticipate needing without delay. When we checked on November 5, its US, EU and global web stores listed no 2.0, J1/J1s or Ray machine but still listed several 2.0 modules and kits as available.

Should I buy a leftover Snapmaker 2.0, J1 or Ray?▼

Only if the remaining support window suits you. The support dates do not restart when you buy an end-of-life machine, no new add-ons are coming, and Snapmaker says compatibility with future third-party slicer versions cannot be guaranteed. When we checked on November 5, Snapmaker’s own web stores listed none of these machines, and its J1s page says the printer “has been discontinued”. Snapmaker’s list of resellers that may still hold end-of-life stock covers Canada, India, Saudi Arabia, Turkey and Europe and names no U.S. seller; confirm stock and warranty with the reseller before ordering.

Media & product inquiries

Have a launch, correction, or test opportunity?

Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.

thecraftycatsman@gmail.com
Continue from here

Choose the useful next step.

Plan a parts order or a replacement against Snapmaker’s dates, then compare current machines by the job your Snapmaker does.

3D Printing
Selective workshop updates

Get the next useful 3D printing update.

When a source-backed change affects what to buy, update, test, or ignore, we send a short decision brief with the evidence, the workshop consequence, and what remains unknown.

Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.

We’ll email a confirmation link first.Privacy details

Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.

See how The Workshop Signal works