Skip to main content
UV PrintingBriefing

xTool O1 Omni Lists $1,699 Entry Pricing; eufyMake E1 Updates Remain Planned

As of October 19, 2026, xTool's U.S. store lists estimated shipping from early December 2026 for new O1 Omni preorders. Dated July 21 report on O1 Omni pricing and eufyMake's E1 roadmap.

Short answer

Dated July 21, 2026: xTool listed O1 Omni Single UV at $1,699, Dual UV at $2,699 and DT+UV at $2,799; new orders were estimated for early or mid-September. As of October 19, 2026, xTool's U.S. store lists estimated shipping from early December 2026 for new O1 Omni preorders. eufyMake then planned E1 bidirectional software for Q3 and CISS for Q4.

By The Crafty CatsmanPublished Updated Read the later update
1

ReportxTool product page

July 21 listings put O1 Omni entry pricing at $1,699 while E1 roadmap updates were still ahead

On July 21, 2026, xTool's US product page listed the O1 Omni Single UV at $1,699 with a $2,499 compare-at figure, Dual UV at $2,699 with a $3,299 compare-at figure, and DT+UV at $2,799 with a $3,499 compare-at figure; the O1 guide carries current pricing. xTool then estimated early September shipping for new Dual UV orders and mid-September for new Single UV and DT+UV orders; those were estimates, not delivery promises. Its support guide lists an Epson F1080 printhead, a 330×420mm standard baseplate, up to 720×1440 dpi, and 7mm embossed print height. eufyMake listed the E1 Basic at $2,499. Its bidirectional mode was then a planned Q3 software update. In eufyMake's A4 test, elapsed time fell from 18:34 to 9:30, but that is a manufacturer test rather than an independent benchmark. The high-capacity CISS was then planned for Q4, and its system price was not final.

Why it matters

On July 21, the useful comparison was the decision state that day, not a countdown. Buyers could compare that day's listed prices, source-described shipping estimates, workspace needs, and E1 capabilities. Comparable independent ink-yield and production-throughput evidence was still missing, so planned software or ink-system improvements should not have been valued as if they were already available.

How to read the July 21 listings+

On July 21, O1 Omni listings were Single UV $1,699 with a $2,499 compare-at figure, Dual UV $2,699 with a $3,299 compare-at figure, and DT+UV $2,799 with a $3,499 compare-at figure. New Dual UV orders were then estimated for early September; new Single UV and DT+UV orders for mid-September. As of October 19, 2026, xTool's U.S. store lists estimated shipping from early December 2026 for new O1 Omni preorders. xTool's support guide lists an Epson F1080 printhead, 330×420mm standard baseplate, 720×1440 dpi maximum resolution, and 7mm embossed print height. E1 Basic was then listed at $2,499; bidirectional mode was planned for Q3 and CISS for Q4, with the system price unfinished.

What it changes: On July 21, the compare-at field was a product-page reference, not a verified future deadline. The practical decision depended on the configuration a buyer needed, estimated timing, E1 fit, and evidence that was still unavailable for ink yield and production throughput.

What remains open:
  • What ink yield and maintenance cost will independent production jobs show for each machine?
  • How closely would the July 21 O1 Omni shipping estimates match actual fulfillment by configuration?
  • What will the E1 CISS system cost, and which configurations will support it?

On July 21, waiting made sense if:Final CISS economics or comparable independent production evidence was required for the decision

On July 21, the O1 Omni listing fit if:The selected configuration, the then-listed shipping estimate, and the published workspace specifications already fit the job

Verified specifications

SpecxTool O1 Omni Single UVeufyMake E1 Basic
Listed entry price on July 21$1,699$2,499
Compare-at figure on July 21$2,499—
New-order shipping estimateMid-September on July 21 (Single UV); as of October 19, 2026, estimated shipping from early December 2026Check current product page
Speed roadmapCurrent specifications onlyQ3 bidirectional software plan
High-capacity ink roadmapNo claim used in this briefQ4 CISS plan; system price TBD

Sources: xTool official specs, eufyMake official specs

Frequently Asked Questions

What prices did xTool list for the O1 Omni on July 21?▼

On July 21, 2026, xTool's US page listed Single UV at $1,699 with a $2,499 compare-at figure, Dual UV at $2,699 with a $3,299 compare-at figure, and DT+UV at $2,799 with a $3,499 compare-at figure. Those were that day's listings; the O1 guide carries current pricing.

When will the xTool O1 Omni ship?▼

On July 21, 2026, xTool's product page estimated early September for new Dual UV orders and mid-September for new Single UV and DT+UV orders. As of October 19, 2026, xTool's U.S. store lists estimated shipping from early December 2026 for new O1 Omni preorders. Already paid? Track the paid order and delivery estimate through xTool's email or account.

Were the eufyMake E1 bidirectional and CISS updates live on July 21?▼

No. On July 21, 2026, eufyMake described bidirectional printing as a planned Q3 2026 software update and the high-capacity CISS as a Q4 plan. Its A4 speed test is a manufacturer result, not an independent benchmark, and the CISS system price was not final then. Check eufyMake for current status.

Media & product inquiries

Have a launch, correction, or test opportunity?

Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.

thecraftycatsman@gmail.com
Continue from here

Choose the useful next step.

UV Printing
Selective workshop updates

Know what changed before it changes your workshop.

When a source-backed change affects what to buy, update, test, or ignore, we send a short decision brief with the evidence, the workshop consequence, and what remains unknown.

Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.

We’ll email a confirmation link first.Privacy details

Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.

See how The Workshop Signal works