E1 Ink Drops to $29.99 With June 1 Price Match; O1 Omni Timing Stays Estimated
eufyMake lowered E1 ink to $29.99 per 100 ml and opened a June 1 price-match window; xTool's O1 Omni prices and September timing remain listed estimates.
eufyMake cut single 100 ml E1 cartridges to $29.99 and its 980 ml ink/cleaning kit to $209.99; purchases from June 1 qualify for its stated price match. Bidirectional printing remains planned for Q3, and CISS for later in 2026. xTool's feed lists O1 Omni prices and September estimates, not delivery commitments.
Story briefeufyMake
eufyMake lowers E1 ink prices while O1 Omni delivery timing remains an estimate
eufyMake says single 100 ml E1 ink cartridges fell from $42.99 to $29.99 on July 13, while the 980 ml ink and cleaning cartridge kit fell from $299.99 to $209.99. Customers who bought ink or cleaning cartridges on or after June 1 can claim the stated price match. Bidirectional printing remains a planned Q3 software update, and the high-capacity continuous ink system is planned for later in 2026 with system pricing still unfinished. The verified xTool feed lists O1 Omni Single UV at $1,699, Dual UV at $2,699, and DT+UV at $2,799. The product page still uses pre-order and estimated-shipping language, so September timing should not be treated as a delivery commitment.
For an E1 owner, the immediate action is the June 1 price-match check and updated ink-input math. The cartridge reduction does not prove total production cost because yield, cleaning draw, waste, labor, and maintenance remain separate. For an O1 buyer, the listed configuration prices are concrete at this check, but availability and fulfillment remain live-page variables. The xTool-supplied test unit has not arrived, so measured yield and maintenance comparisons are still pending.
Current buyer read
eufyMake's July update sets US single-cartridge pricing at $29.99 per 100 ml and the 980 ml ink/cleaning kit at $209.99. Its stated price match covers ink and cleaning cartridges bought from June 1. The company still places bidirectional printing in Q3 and the high-capacity CISS later in 2026. The xTool feed check confirmed the three listed O1 base configurations and prices; the product page describes fulfillment with pre-order and estimate language.
Decision boundary: The E1 change lowers a known ink input, not every production expense. O1 prices can be compared as listed figures, but fulfillment timing and real operating economics remain open. The incoming xTool-supplied test unit is not yet hands-on evidence.
- What will the final CISS system price be?
- How will measured ink yield, cleaning draw, maintenance, and fulfillment compare after the O1 test unit arrives?
If you own the E1: Check price-match eligibility for ink or cleaning cartridges bought on or after June 1 and update job estimates with the current $29.99 cartridge input
If you are comparing machines: Treat xTool prices as feed-verified listings and September timing as an estimate; verify the selected configuration before committing
Verified specifications
| Spec | xTool O1 Omni | eufyMake E1 |
|---|---|---|
| Current brief's price signal | $1,699 Single / $2,699 Dual / $2,799 DT+UV | $29.99 / 100 ml single cartridge |
| Immediate action | Verify selected pre-order configuration | Claim eligible June 1+ ink price match |
| Timing language | September estimates; not commitments | Q3 bidirectional update planned |
| High-capacity ink | No update in this source check | CISS planned later in 2026; system price unfinished |
| Independent operating data | Test unit not received | Ink price is not total job cost |
Sources: xTool official specs, eufyMake official specs
Affiliate disclosure: We may earn from qualifying purchases, at no extra cost to you.
Official and editorial links connected to this update.
Frequently Asked Questions
Who qualifies for eufyMake's E1 ink price match?▼
eufyMake says customers who purchased ink and cleaning cartridges on or after June 1, 2026, are eligible for a price match following the July price reduction. Check the official eufyMake post for the current claim process.
Are the E1 bidirectional update and CISS available now?▼
No. eufyMake describes bidirectional printing as a planned Q3 2026 software update and the high-capacity continuous ink system as planned for later in 2026. The CISS system price is still being finalized.
Are xTool's O1 Omni September dates guaranteed?▼
No. The official page uses pre-order and estimated-shipping language, and timing can vary with the selected configuration or accessory bundle. Treat September as a source-described estimate and check the live selection before ordering.
Know what changed before it changes your workshop.
Every morning, our news desk checks official product pages, release notes, launch terms, software updates, and credible maker reporting. When a change affects what to buy, update, test, or ignore, we send a short decision brief with the source, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal worksDon't stop at the headline
This story belongs to our UV printers, operating costs, materials, and real workshop fit. Pick the route that matches what you want to understand or do next.