HeyGears G1 Kickstarter Opens at $1,999; xTool O1 Omni Final Payment Closes August 15
HeyGears G1 Series Kickstarter launched July 23 at $1,999 Super Early Bird with G1X Starter at $3,299; xTool O1 Omni final payment window closes August 15, with deposit backers shipping in August.
Checked July 29, 2026: HeyGears G1 Kickstarter opened July 23 at $1,999 Super Early Bird; G1X Starter runs $3,299 (MSRP $4,999). G1X ships December 2026, G1 ships March 2027. xTool O1 Omni final payment window closes August 15; deposit backers ship in August, new direct orders target early-to-mid September by edition.
Report3DPrint.com (Kickstarter launch coverage) / HeyGears Kickstarter
HeyGears G1 Series Kickstarter went live July 23 with Super Early Bird pricing; G1X ships December 2026
HeyGears launched its G1 Series Kickstarter on July 23, 2026, at 9:00 AM PDT. Super Early Bird pricing opened the G1 Starter at $1,999. The G1X Starter Pack carries a Kickstarter price of $3,299 against a listed MSRP of $4,999. The G1X Full-3D Pack is $3,599 (MSRP $5,499), the G1X Deluxe Bundle is $4,999 (MSRP $7,999), and the G1X Full-3D Twin Pack is $6,798. Backers who pledged within the first 48 hours received a free white ink or resin set valued at $109, plus an entry to win a full refund. HeyGears targets December 2026 for G1X-related reward shipments and March 2027 for the G1 Starter Pack. The G1X uses an Epson i3200 printhead with 3,200 nozzles, 3.9 pL droplets, and an 8-channel UV ink system capable of producing more than 10 million colors. Three workflows are listed: 2D UV printing on flat, curved, or roll-fed substrates; 3D texture printing with raised texture up to 5 mm high; and full-color 3D mode that builds objects layer by layer in full color without post-print painting. Source: 3DPrint.com, Kickstarter campaign, HeyGears official store.
The July 23 launch sets real Kickstarter prices, not just reservation figures. The gap between G1X Kickstarter tiers ($3,299–$4,999) and MSRP ($4,999–$7,999) defines the campaign incentive, but ship dates are December 2026 at the earliest for G1X rewards and March 2027 for the G1 Starter. This is a crowdfunding campaign — specifications, imaging, and delivery timing remain subject to change until production units are in backers' hands. The July 12 deposit brief noted that HeyGears imagery may show prototypes; that caveat still applies.
Campaign vs. retail read
HeyGears lists three operational modes for the G1X: 2D UV printing (flat, curved, or roll-fed substrates via attachments), 3D texture mode (raised texture up to 5 mm), and full-color 3D mode (layer-by-layer object printing in full color without post-paint). The G1X uses an Epson i3200 printhead with 3,200 nozzles, 3.9 pL droplets, and 8-channel UV ink. Shipping targets are December 2026 for G1X rewards and March 2027 for the G1 Starter. These are campaign promises, not production-confirmed dates.
Where this fits the UV desktop market: The G1X enters a UV desktop segment currently occupied by the xTool O1 Omni and eufyMake E1, but targets a different buyer: one who needs full-color 3D object printing rather than UV marking on pre-formed objects. At $3,299–$4,999 Kickstarter pricing against an MSRP of $4,999–$7,999, the G1X sits above the O1 Omni's $1,699–$2,799 base range. The technology overlap — UV ink, desktop scale — is real, but the workflows and use cases are distinct.
- What are the measured running costs per job for UV ink in the G1X's three modes?
- How will the full-color 3D mode perform on production hardware compared to pre-campaign materials?
- What are actual refund and fulfillment terms if production is delayed beyond the stated December 2026 / March 2027 targets?
Wait if:You need production-confirmed performance data, ink cost benchmarks, or a firm non-crowdfunding purchase path before committing
Back only if:You have read the campaign's refund and fulfillment terms, accept crowdfunding delivery risk, and the full-color 3D workflow — not just UV marking — is the specific need
Verified specifications
| Spec | HeyGears G1 Starter | HeyGears G1X Starter Pack |
|---|---|---|
| Kickstarter price | $1,999 Super Early Bird | $3,299 (MSRP $4,999) |
| Target ship date | March 2027 | December 2026 |
| Printhead | Not specified in results | Epson i3200, 3,200 nozzles, 3.9 pL |
| Color range | Not specified | 10M+ colors (8-channel UV ink) |
| 3D texture height | Not specified | Up to 5 mm |
| Production status | Crowdfunding (Kickstarter) | Crowdfunding (Kickstarter) |
| Independent testing | None at this check | None at this check |
Sources: HeyGears official specs, HeyGears official specs
Primary pages and records used for this report.
ReportxTool
xTool O1 Omni final payment window closes August 15; deposit backers ship in August, new orders target September
The xTool O1 Omni final payment window runs July 15 through August 15, 2026, and must be completed by 11:59:59 p.m. local time August 15 to retain deposit-exclusive benefits. Shipping priority for deposit backers is determined by the order in which final payments are completed, not by when deposits were placed. Deposit backers are told shipping starts in August. New direct orders placed after the pre-order period show early September for the Dual UV edition and mid-September for the Single UV and DT+UV editions. xTool's confirmed US prices as of the July 16 global launch: Single UV Standalone $1,699, Rotary $2,059; Dual UV Standalone $2,699, Rotary $3,059, Versatile $3,869; DT+UV Standalone $2,799, Rotary $3,159, Versatile $3,969. Source: xTool official product page.
For deposit backers, the August 15 deadline is a concrete action — complete final payment before then to retain deposit benefits and to secure earlier shipping priority. The timing distinction between deposit-backer August shipping and new-order September timing is meaningful for buyers who were waiting to see if the product shipped before committing. Timing signals from a pre-order listing page should still be treated as estimates; actual fulfillment depends on production and logistics.
Deadline and timing check
xTool's O1 Omni pre-order window ran through July 15 with a $50 refundable deposit. The final payment window (July 15–August 15) converts deposit holds into confirmed orders. Payment completion order — not deposit date — determines shipping priority for August fulfillment. New direct orders opened July 17 show early September (Dual UV) and mid-September (Single UV, DT+UV) on the product page. All timing is described using pre-order and estimated-shipping language.
What the August 15 deadline means: The deadline creates a clear near-term decision point: deposit backers who complete payment before August 15 secure earlier shipping priority. Buyers who did not deposit must now choose between a new direct order at September timing or opting out. Both paths start from the same published price list.
- How closely will actual August/September ship windows match the published estimates by edition?
- What warranty, return, and support terms apply to the first wave of O1 Omni units?
If you hold a deposit:Complete final payment before August 15 to retain deposit benefits and shipping priority — check the payment process at the official xTool page
If you are a new buyer:New direct orders are open with estimated September timing by edition; verify the selected configuration and current terms at the official product page before ordering
Verified specifications
| Spec | xTool O1 Omni Single UV | xTool O1 Omni Dual UV | xTool O1 Omni DT+UV |
|---|---|---|---|
| Standalone price | $1,699 | $2,699 | $2,799 |
| Deposit backer shipping | August 2026 (estimate) | August 2026 (estimate) | August 2026 (estimate) |
| New order shipping | Mid-September (estimate) | Early September (estimate) | Mid-September (estimate) |
| Final payment deadline | August 15, 2026 | August 15, 2026 | August 15, 2026 |
| Independent testing | Not yet available | Not yet available | Not yet available |
Sources: xTool official specs, xTool official specs, xTool official specs
Primary pages and records used for this report.
Affiliate disclosure: We may earn from qualifying purchases, at no extra cost to you.
Relevant paid links for the decision described above.
Frequently Asked Questions
When does the xTool O1 Omni final payment window close?▼
xTool's final payment window runs July 15 through August 15, 2026, and must be completed by 11:59:59 p.m. local time on August 15. Completing payment earlier secures an earlier position in the deposit-backer shipping queue; priority is based on payment completion order, not when the original deposit was placed.
What is the difference in shipping timing between O1 Omni deposit backers and new direct orders?▼
Deposit backers who complete final payment before August 15 are told shipping starts in August 2026. New direct orders placed after the pre-order period show early September for the Dual UV edition and mid-September for the Single UV and DT+UV editions. All timing is listed as estimates on the product page.
When did HeyGears G1 go live on Kickstarter?▼
HeyGears launched the G1 Series Kickstarter on July 23, 2026, at 9:00 AM PDT, with Super Early Bird pricing starting at $1,999 for the G1 Starter. The prior July 12 brief covered the deposit reservation phase; the July 23 launch set the first live Kickstarter prices and confirmed December 2026 shipping for G1X rewards and March 2027 for the G1 Starter.
What is the difference between the HeyGears G1 and G1X?▼
Based on Kickstarter pricing and available spec details: the G1X uses an Epson i3200 printhead, an 8-channel UV ink system producing 10M+ colors, and is listed for December 2026 shipping. The G1 Starter carries a lower Super Early Bird price of $1,999 and a later March 2027 ship target. HeyGears imagery and specifications may still reflect prototypes or renderings until production units are confirmed.
Have a launch, correction, or test opportunity?
Brands, product teams, and knowledgeable sources can send relevant details, approved media, or corrections. Coverage is selected independently.
Choose the useful next step.
Know what changed before it changes your workshop.
Every morning, our news desk checks official product pages, release notes, launch terms, software updates, and credible maker reporting. When a change affects what to buy, update, test, or ignore, we send a short decision brief with the source, the workshop consequence, and what remains unknown.
Know what changed. Know what it means at the bench. Decide whether to act, wait, update, test, or ignore.
Scanned daily. Sent only when the signal changes a workshop decision, with a rare alert when waiting would matter.
See how The Workshop Signal works